™
Radio Controlled
Quadcopter
Ominus Quadcopter
Flight
Battery
2G Memory
Card
Card Reader
Spare Blades
(2 black, 2 color)
AA
Batteries (4)
Controller
USB Charger
Phone Mount
Light Shield
CHARGING
•
NEVER
leave the battery unattended while charging.
•
DO NOT
allow the USB port to power down while the
charger is connected to the battery.
•
ALWAYS
unplug the charger from the USB port and
the battery when charging is complete.
Plug the charger into a USB port or AC adapter (not included) as shown and connect the battery.
The charger LED is steady on when charging. The LED flashes when charge is complete.
INSTALL BATTERIES INTO RADIO
Slide the cover down and insert 4 AA batteries.
LINKING
1. Turn on the radio with the throttle
at its lowest position.
2. Connect the battery to the Ominus and place it on a level
surface. The LED on the quad will flash rapidly when the
quad is linked to the radio and ready to fly.
ALWAYS
unplug the battery after flying!
BEFORE
FLYING, PLEASE
READ & UNDERSTAND
THESE INSTRUCTIONS!
and go to
www.knowbeforeyoufly.org
PO
WER SWITCH
