Installing a Micro SIM Card in a HOBO® MicroRX (RX210x) Station
23845-C
Requirements:
•
HOBO RX2100 MicroRX Station
•
USB cable
•
HOBOware® 3.7.17 or higher
•
User-provided data plan and SIM requirements:
Micro SIM for 4G LTE Network; supports UMTS/HSPA+ at 800, 850, 900, 1800, 1900, or 2100 MHz and LTE at 700,
800, 850, 900, 1800, 1900, 2100, or 2600 MHz
The SIM must already be activated and unlocked
APN for the associated carrier
To install a SIM card:
1.
Make sure the station is powered down. Unplug the battery cable and the solar panel cable and AC adapter (if
applicable).
2.
Carefully slide the micro SIM card into the SIM port and gently push it into place (you will hear a
click when it is properly seated).
Battery disconnected;
no charging device
plugged in
Micro SIM installed
