background image

HOBO® TidbiT® MX Temp 400 (MX2203) and  
Temp 5000 (MX2204) Logger Manua

21537-N 

HOBO TidbiT MX Temp loggers measure temperature in streams, lakes, oceans, coastal 
habitats, and soil environments. Housed in a protective boot, these rugged loggers are 
designed for extended deployments in fresh or salt water at depths up to 400 ft (MX2203) or 
5,000 ft (MX2204). The loggers use Bluetooth® Low Energy (BLE) for wireless communication 
with a phone, tablet, or computer, and are equipped with an optional water detection feature 
that automatically turns Bluetooth advertising off when the logger is submerged in water, 
preserving battery power. Using the HOBOconnect® app, you can easily configure the loggers, 
download logged data to your mobile device or computer, or automatically upload the data to 
HOBOlink® for further analysis. You can also configure the loggers to calculate statistics, set up 
alarms to trip at specific thresholds, or enable burst logging in which data is logged at a faster 
interval when sensor readings are above or below certain limits.

 

 

Specifications 

Temperature Sensor 

Range 

MX2203: -20° to 70°C (-4° to 158°F) in air; -20° to 50°C (-4° to 122°F) in 
water 
MX2204: -20° to 70°C (-4° to 158°F) in air; -20° to 50°C (-4° to 122°F) in 
water, maximum sustained temperature in water 30°C (86°F) 

Accuracy 

±0.25°C from -20° to 0°C (±.45°F from -4° to 32°F) 
±0.2°C from 0° to 70°C (±0.36°F from 32° to 158°F) 

Resolution 

0.01°C (0.018°F) 

Drift 

<0.1°C (0.18°F) per year 

Response Time 

MX2203: 17 minutes typical to 90% in air moving 1 m/s, unmounted; 
7 minutes typical to 90% in stirred water, unmounted 
MX2204: 15 minutes typical to 90% in air moving 1 m/s, unmounted;  
4 minutes typical to 90% in stirred water, unmounted 

Logger 

 

Logger Operating Range 

-20° to 70°C (-4° to 158°F) 

Buoyancy (Fresh Water) 

MX2203: 3.1 g (0.11 oz) negative 
MX2204: 7.6 g (0.27 oz) negative 

Waterproof 

MX2203: To 122 m (400 ft) 
MX2204: To 1,524 m (5,000 ft) 

Water Detection 

Water conductivity level of 100 µS/cm or greater necessary for reliable 
detection of water. Deionized water or water below 100 µS/cm may 
not be detected. 
The water conductivity circuit may not reliably detect water that has 
frozen around the electrodes, i.e., below 0°C (32°F). 

Radio Power 

1 mW (0 dBm) 

Transmission Range 

Approximately 30.5 m (100 ft) line-of-sight 

Wireless Data Standard 

Bluetooth Low Energy (Bluetooth Smart) 

Logging Rate 

1 second to 18 hours 

Time Accuracy 

±1 minute per month at 25°C (77°F) 

Battery 

CR2477 3V lithium, user replaceable in MX2203, non-replaceable in 
MX2204 

Battery Life 

3 years, typical at 25°C (77°F) with logging interval of 1 minute and 
Bluetooth Always Off disabled in software. 
5 years, typical at 25°C (77°F) with logging interval of 1 minute and 
Bluetooth Always Off or Bluetooth Off Water Detect enabled in the app. 
Faster logging intervals and statistics sampling intervals, burst logging, 
remaining connected with the app, excessive downloads, and paging 
may affect battery life. 
See 

Battery Information

 for detailed instructions on replacing the battery 

in the MX2203 logger. 

Memory 

96,000 measurements 

HOBO TidbiT MX Temp 
Logger 

Models: 

 

MX Temp 400 (MX2203) 

 

MX Temp 5000 
(MX2204) 

Items included: 

 

Protective boot 

Required Items: 

 

HOBOconnect app 

 

Mobile device with 
Bluetooth and iOS, 
iPadOS®, or Android™, 
or a Windows computer 
with a native BLE 
adapter or supported 
BLE dongle 

Accessories: 

 

Solar radiation shield 
(RS1 or M-RSA) for 
MX2203 

 

Mounting bracket for 
solar radiation shield 
(MX2200-RS-BRACKET), 
for use with MX2203 
models 

 

Replacement O-rings 
(MX2203-ORING) for 
MX2203 

 

Replacement boots for 
both models in gray 
(BOOT-MX220x-GR), 
black (BOOT-MX220x-
BK), or white (BOOT-
MX220x-WH) 

 

 

MX2203 Model Shown 

Summary of Contents for TidbiT MX Temp 400










Reviews: