Christmas Tree
Model: TG66M3W89D12
Sku # 760 363
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b. This product is for indoor use only.
c. This seasonal product is not intended for permanent installation or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or place
on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for the
night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire, burns,
personal injury and electric shock it should not be played with or
placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light string.
k. Do not close doors or windows on the product or extensions cords as
this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that is not a
part of the product when in use.
m. Read and follow all instructions that are on the product or provided
with the product.
n.
SAVE THESE INSTRUCTIONS
Operation
When using electrical products, basic precautions should always
be followed, including the following:
Package Contents
Pre-Assembly
Assembling the tree stand
Assembly
Part Description Quantity
D Tree stand 1
A Tree top, tag 3 1
B Tree center, tag 2 1
C Tree bottom, tag 1 1
Step 1
. Choose a location near a wall outlet.
Step 2
. Unfold the legs of the tree stand and lay the stand on the floor.
Step 3
. Slide the locking disk of the tree stand down until it snaps into place.
Turning on the tree
Maintenance
Care and Cleaning
Spare parts
Repairing Loose Hinges
NOTE: If some bulbs do not light or flicker, search for any loose plugs
and/or broken, loose, or missing bulbs. Replace bulbs promptly with the
replacement bulbs provided in order to maintain the performance and
life expectancy of your tree.
Step 1
. Connect the light strings of the tree together and plug the power
cord into a wall outlet.
Step 2
. If the tree comes with a foot pedal, step on the On/Off button.
This tree package includes hinge pins, washers and bulbs, for any
replacement or repair that you need to perform on your tree. If extra
parts are needed, contact the Customer Service Team at 1-877-527-0313
between the hours of 8 am and 5 pm EST, Monday through Friday.
Step 1
. Remove all ornaments and decorations.
Step 2.
Unplug the cord from the wall and then unplug each section of the tree.
Step 3
. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
Step 4
. Repeat this step for the center and bottom tree sections.
Step 5
. Carefully place all tree sections into a shipping box and tape it shut.
Step 6
. Store your tree in a cool, dry place away from sunlight.
Step 1
. Place the branch into the slot of the bracket
Step 2
. Insert a new hinge pin through the holes of the bracket and
secure with a washer.
Section 3
Section 2
Section 1
Control box
Adaptor
To Be Plugged
Into Wall
Outlet
Foot Pedal
on/off Switch
100S
100S
100S
Step 1.
Grasp the power adapter or power cord plug, and than
unplug from the power outlet. Do not pull the power cord.
LAMP REPLACEMENT
Step 2. Lift up lamp lock tab, then pull the
lamp and plastic lamp base straight
out of the lamp-holder.
Step 3.
Replace with a new spare lamp
provided with this product.
( Reference figure only)
USER SERVICING INSTRUCTIONS
Step 1
. Remove the protective caps from the tree bottom and insert
the pole into the tree stand.
Step 2
. Continue by inserting the upper tree section(s) to the lower
section(s) until inserting the tree top.
Step 3
. Shape the branches to your preference by working from the
bottom to the top. When adjusting branches, ensure that all wires
are free of branch hinges.
Step 4
. Connect the light strings as per the color labels indicated in
attached photo and insert green label plug into the wall outlet.
Step 5
. When finished shaping the branches, slightly upsweep all branch
tips for a uniform look.
Assembling the tree
