Assembling the tree stand
Assembly
Step 1
. Choose a location near a wall outlet.
Step 2
. Unfold the legs of the tree stand and lay the stand on
the floor.
Step 3
. Slide the locking disk of the tree stand down until it
snaps into place.
Step 1
. Remove the protective caps from the tree bottom and insert
the pole into the tree stand.
Step 2
. Continue by inserting the upper tree section(s) to the lower
section(s) until inserting the tree top.
Step 3
. Shape the branches to your preference by working from the
bottom to the top. When adjusting branches, ensure that all wires
are free of branch hinges.
Step 4
. Connect the light strings as per the color labels indicated in
attached photo and insert green label plug into the wall outlet.
Step 5.
Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape,
and continue until the entire tree is shaped.
Step 6.
When finished shaping the branches, slightly upsweep all branch
tips for a uniform look.
Assembling the tree
Christmas Tree
Model: TG70M5410L00
Sku # 1003 173 219
Tree top
Section 2
Section 1
Insert
green-labelled
plug into wall
outlet
Foot Pedal
on/off Switch
Insert Red Label
Plugs Into Red
Labeled Extension Cord
S100
S100
S100
Package Contents
Pre-Assembly
Part Description
Quantity
1
1
1
1
D Tree stand
A Tree top
B
Tree center, Sticker 2
C
Tree center, Sticker 1
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b. This product is for indoor use only. The electrical rating is 0.12A
120V 60Hz.
c. This seasonal product is not intended for permanent installa
tion or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails, or
place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for
the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire,
burns, personal injury and electric shock it should not be
played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or
light string.
k. Do not close doors or windows on the product or extensions
cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that
is not a part of the product when in use.
m. Read and follow all instructions that are on the product or
provided with the product.
n.
SAVE THESE INSTRUCTIONS
When using electrical products, basic precautions should always
be followed, including the following:
Top view
Side view
TM
NEED HELP?
DO NOT RETURN TO STORE. Call: 1-877-527-0313
Form 8am to 5pm EST, Monday through Friday.
