background image

Step 1. Choose a location near a wall outlet.
Step 2. Unfold the legs of the tree stand and lay the stand 
            on the floor.
Step 3. Slide the locking disk of the tree stand down until it 
                snaps into place.

Assembling the tree
This tree assmebles with Quick Set® technology
---Set up and light up your tree in less than 10 minutes!
Step 1.
 Remove the protective caps from the tree bottom and 
               insert the pole into the tree stand.
Step 2. Continue by inserting the upper tree section(s) to the 
                lower section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working from 
                the bottom to the top. When adjusting branches, ensure 
                that all wires are free of branch hinges.
Step 4. Insert the adapter into the wall outlet. All your lights  
               should now be lit.
Step 5. Shape the tree from the bottom to the top. Start with 
                the branches farthest from the pole – fan out in a star 
                shape, and continue until the entire tree is shaped.

Step 6. When finished shaping the branches, slightly upsweep 
                all branch tips for a uniform look.

Assembly

Assembling the tree stand

Tree top

Section 3

Section 1

Section 2

Adapter

To Be Plugged

Into Wall

Outlet

Christmas Tree

Model: TG90P3D93L01

Sku # 1005 235 129

Foot Pedal

on/off Switch

Top view

Side view

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

a. 

READ AND FOLLOW ALL 

   SAFETY INSTRUCTIONS.

When using electrical products, basic precautions should always 
be followed, including the following:

b.  Do not use seasonal products outdoors unless marked suitable for 

indoor and outdoor use. When products are used in outdoor applications, 
connect the product to a Ground Fault Circuit Interrupting (GFCI) 
outlet. If one is not provided, contact a qualified electrician for proper 
installation.

c.  This seasonal product is not intended for permanent installation or use.
d.  Do not mount or place the product near gas or electric heaters, 

fireplaces, candles, or other similar sources of   heat.

e.  Do not secure the wiring of the product with staples or nails, or place on 

sharp hooks or nails.

f.   Do not let lamps rest on the supply cord or on any wire.
g.  Unplug the product when leaving the house, when retiring for the 

night, or if left unattended.

h.  This is an electric product and not a toy! To avoid risk of fire, burns, 

personal injury and electric shock it should not be played with or 
placed where small children can reach it.

i.   Do not use this product for other than its intended use.
j.   Do not hang ornaments or other objects from cord, wire, or light string.
k.  Do not close doors or windows on the product or extensions cords as 

this may damage the wire insulation.

l.   Do not cover the product with cloth, paper, or any materi al that is not 
      a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not twist lamps.
n.  Read and follow all instructions that are on the product or provide with 

the product.

o.  

SAVE THESE INSTRUCTIONS

NEED HELP?

DO NOT RETURN TO STORE. Call: 1-877-527-0313 

Form 8am to 5pm EST, Monday through Friday.

Align both arrows 

in a straight line 

before sliding 

down to insert

Open the

cap cover

Do Not Tamper 

Internal Parts

100S

100S

Pre-Assembly

Package Contents

Part                           Description                             Quantity 

E                              Tree stand                                       1 

B                       

Tree center,

 Sticker 3

 

                            1 

A                                 Tree top                                       1 

C                       

Tree center,

 Sticker 2

 

                            1 

D                       

Tree center,

 Sticker 1

 

                            1 

100S

100S

100S

100S

100S

100S

100S

100S

100S

C O L L E C T I O N

DECORATORS 

®

Reviews: