Christmas Tree
Model: TGC0P5402C01
Sku # 417 347
b. Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is
not provided, contact a qualified electrician for proper
installation.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of
heat.
e. Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of
fire, burns, personal injury and electric shock it should
not be played with or placed where small children can
reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire,
or light string.
k. Do not close doors or windows on the product or exten-
sions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any mate-
rial that is not a part of the product when in use.
m.This product has a polarized plug (one blade is wider
than the other) as a feature to reduce the risk of electric
shock. This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician.
Do not use with an extension cord unless plug can be
fully inserted. Do not alter or replace the plug.
n. This product is equipped with push-in type lamps. Do
not twist lamps.
o. This product employs overload protection (fuse). A
blown fuse indicates an overload or short-circuit situa-
tion. If the fuse blows, unplug the product from the
outlet. Also unplug any additional strings or products
that may be attached to the product. Replace the fuse as
per the user servicing instructions (follow product
marking for proper fuse rating) and check the product.
p .Read and follow all instructions that are on the prod uct
or provide with the product.
q.
SAVE THESE INSTRUCTIONS
Package Contents
Pre-Assembly
Part Description Quantity
F Tree stand 1
A Tree top, tag 5 1
B Tree center 1, tag 4 1
C Tree center 2, tag 3 1
D Tree center 3, tag 2 1
E Tree bottom, tag 1 1
Assembling the tree stand
Assembly
Step 1.
Pull apart the legs of the stand so that they are
snapped into an x-shape, place the tree stand on a
level surface.
Step 2.
When inserting the bottom section of the tree into
the assembled stand, insert and turn the eyebolts
into the stand and tighten until the tree pole is
firmly secured.
Step 3. To close the stand, remove the eyebolts, press the
metal button and fold the legs together.
This tree assmebles with Quick Set® technology
---Set up and light up your tree in less than 10
minutes!
Step 1. Remove the protective caps from the tree bottom
and insert the pole into the tree stand.
Step 2. Continue by inserting the upper tree section(s) to
the lower section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working
from the bottom to the top. When adjusting
branches, ensure that all wires are free of branch
hinges.
Step 4. Insert the green label extension cord plug into the
wall outlet. All your lights should now be lit.
Step 5. When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
Assembling the tree
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should
always be followed, including the following:
Eye Bolt
Click
Eye Bolt
