background image

Christmas Tree

Model: TV50M6196L00

Sku # 1001 123 015

Pre-Assembly

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

a.  

READ AND FOLLOW ALL 

   SAFETY INSTRUCTIONS.

When using electrical products, basic precautions should 

always be followed, including the following:

b.  Do not use seasonal products outdoors unless marked   

      suitable for indoor and outdoor use. When products are  

      used in outdoor applications, connect the product to a  

      Ground Fault Circuit Interrupting (GFCI) outlet. If one is 

      not provided, contact a qualified electrician for proper 

      installation.
c.   This seasonal product is not intended for permanent 

     installation or use.

d.  Do not mount or place the product near gas or electric 

      heaters, fireplaces, candles, or other similar sources of 

      heat.
e.  Do not secure the wiring of the product with staples or 

      nails, or place on sharp hooks or nails.
f.   Do not let lamps rest on the supply cord or on any wire.
g.  Unplug the product when leaving the house, when  

      retiring for the night, or if left unattended.
h.  This is an electric product and not a toy! To avoid risk of  

      fire, burns, personal injury and electric shock it should not  

      be played with or placed where small children can reach it.
i.   Do not use this product for other than its intended use.
j.   Do not hang ornaments or other objects from cord, wire, 

      or light string.
k.  Do not close doors or windows on the product or exten 

      sions cords as this may damage the wire insulation.
l.   Do not cover the product with cloth, paper, or any materi 

      al that is not a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not 

      twist lamps.

n.  Read and follow all instructions that are on the product          

      or provide with the product.

o.  

SAVE THESE INSTRUCTIONS.

LAMP REPLACEMENT

Step 2. Lift up lamp lock tab, then pull the 

               lamp and plastic lamp base straight 

                out of the lamp-holder.

Step 3. Replace with a new spare lamp 

                provided with this product.

( Reference figure only)

USER SERVICING INSTRUCTIONS

Assembling the tree stand

Assembly

Step 1. Choose a location near a wall outlet. 
Step 2. Unfold the legs of the tree stand (D) and lay the stand on                 

                the floor. 
Step 3. Slide the locking disk of the tree stand (D) down until it 

                snaps into place. 

Step 1. Remove the protective caps from the tree bottom (C) and 

                insert the pole into the tree  stand (D). 
Step 2. Remove the protective caps from the tree center (B) and 

                insert the pole into the tree bottom (C) . 
Step 3. Insert the tree top (A) into the tree center (B). 
Step 4. Shape the branches to your preference by working from the 

                bottom to the top. When adjusting branches, ensure that all 

                wires are free of branch hinges.  
Step 5. Inplug the adaptor into the wall outlet. All your lights should    

                now be lit.
Step 6.

 

Shape the tree from the bottom to the top. Start with the     

               branches farthest from the pole – fan out in a star shape, 

               and continue until the entire tree is shaped.

Step 7. When finished shaping the branches, slightly upsweep all 

                branch tips for a uniform look.  

Assembling the tree

TM

Step 1.

 

Grasp the power adaptor or power cord plug, and than 

                unplug from the power outlet. Do not pull the power cord.

Package Contents

A

B

D

Tree top

Tree center

, tag 2

Tree bottom, tag 1

Tree stand

1
1
1
1

Quantity

Part

Description

Top view

Side view

Reviews: