background image

EASY ASSEMBLY AND OPERATION INSTRUCTIONS

Spellbinding Witch Sisters

This item, when assembled by the following instructions, 
should take 15 minutes to assemble. Please follow the step 
by step guide and enjoy your Spellbinding Witch Sisters!

B

B

A

1/5

A

B

C

D

H

O

U

V

W

X

Y

P

Q

R

S

T

J

K

L

M

N

F

G

PARTS LIST

A.     Base
B.     Support Poles x 2
C.     Function control box frame
D.     Center Witch Frame
E.     Right Side Center Witch Frame
F.     Left Side Center Witch Frame
G.    Center Witch Head 
H.    Right Side Witch Head 
I.     Left Side Witch Head
J.    Cauldron
K.    Center Witch Costume
L.    Center Witch Right Arm
L-1.  Book
M.  

  

Center Witch Left Arm

N.   Right Side Witch Costume
O.   Right Side Witch Right Arm
P.  

  

Right Side Witch Left Arm

Q.   Left Side Witch Costume
R.  

  

Left Side Witch Right Arm Holding Rat

S.  

  

Left Side Witch Left Arm

T.  

  

Center Witch Cape

U.   Right Side Witch Cape

STEP 2

NOTE: The speaker on the Function Control Box located on the (C) 

Function Control 

Box 

Frame should be facing front. Assemble the (C) 

Function Control Box

 Frame 

onto the (B) Support Poles as shown, and secure by aligning the quick-connect 
push buttons into the pre-drilled holes. 

C

B

B

1

2

3

BEFORE ASSEMBLING, REMOVE ALL THE ABOVE PARTS FROM BOX. IF ANY PART IS MISSING, DO NOT ATTEMPT TO ASSEMBLE THE PRODUCT AND CONTACT CUSTOMER 
SERVICE FROM 8:30AM TO 5:30PM PST AT 1-855-428-3921.

 

UL Power Adapter

* UL Power Adapter Spec

Input: 100 - 240VAC 50/60Hz

Output: 5.9V 1.5A

V.    Left Side Witch Cape
W.   Center Witch Hat
X.    Right Side Witch Hat
Y.    Left Side Witch Hat

STEP 1

NOTE: The longer end of the (A) Base goes towards the front. First, assemble the (B) Support 
Poles to the (A) Base as shown, and secure by aligning the quick-connect push buttons into 
the pre-drilled holes.

E

WARNING

This item is not a toy and should be used for decoration only. This item contains small parts that 
can be a choking hazard. Keep all plastic and wire parts away from children. 
1. Please use the transformer supplied by manufacturer.
2. Please assemble item according to instructions. Connect all wires according to matching 
    color. 
3. Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping 
    hazard. Keep all away from the transformer, as it heats up during operation. 

Please read all instructions carefully before assembling. Save this instruction sheet for future 
reference.

CARE AND STORAGE INSTRUCTIONS

For best performance operate your item indoors. When not in use, store this product in it’s 
original packing. Keep away from heat and moisture.

I

Model#5124441

Summary of Contents for Spellbinding Witch Sisters






Reviews: