- Comfort Breeze
TM
Press and release the button to enable Comfort Breeze
TM
; this will
change your fan speed randomly, simulating a relaxing breeze. To cancel
this feature press or .
Installation
INSTALLATION AND OPERATION
CEILING FAN REMOTE CONTROL
Safety Information
Warranty
CAUTION:
Incorrect wire
connections will damage this
receiver.
The supplier warrants the remote control and receiver to be free from defects in
workmanship and material present at time of shipment from the factory for a period
of one year after the date of purchase by the original purchaser. We agree to correct
such defects without charge or at our option replace with a comparable or superior
model if the product is returned. To obtain warranty service, you must present a
copy of the receipt as proof of purchase. All costs of removing and reinstalling the
product are your responsibility. Damage to any part such as by accident or misuse or
improper installation or by affixing any accessories, is not covered by this warranty.
Servicing performed by unauthorized persons shall render the warranty invalid. There
is no other express warranty. Home Depot hereby disclaims any and all warranties,
including but not limited to those of merchantability and fitness for a particular
purpose to the extent permitted by law. The duration of any implied warranty which
cannot be disclaimed is limited to the time period as specified in the express warranty.
Some states do not allow a limitation on how long an implied warranty lasts, so the
above limitation may not apply to you. The retailer shall not be liable for incidental,
consequential, or special damages arising out of or in connection with product use
or performance except as may otherwise be accorded by law. Some states do not
allow the exclusion of incidental or consequential damages, so the above exclusion
or limitation may not apply to you. This warranty gives specific legal rights, and you
may also have other rights which vary from state to state. This warranty supersedes
all prior warranties. Shipping costs for any return of product as part of a claim on the
warranty must be paid by the customer.
Contact the Customer Service Team at 1-800-330-3267
Pre-Installation
TOOLS REQUIRED
Step
ladder
Part
Description
Quantity
A
Remote control
1
B
Receiver
1
C
AAA 1.5V battery
2
D
Plastic wire
connector
5
E
Mounting screw
2
F
Rubber isolated pad
2
G
Wall bracket
1
PACKAGE CONTENTS
IMPORTANT:
This product
and/or components
are governed by one or
more of the following
U.S. Patents: 5,947,436;
5,988,580; 6,010,110;
6,046,416, 6,210,117 and
other patents pending.
1
NOTE:
The remote control
has already been paired
at factory for your
convenience. If installing
two or more remote
controls in your home,
please follow the steps
below to control each fan
independently.
Pairing the remote control
Operating Fan with the BOND App
1. YOU MUST SET CEILING FAN TO HIGH
SPEED AND LIGHT KIT (IF ANY) TO
THE ON POSITION USING THE PULL
CHAINS (IF APPLICABLE) BEFORE
OPERATING REMOTE CONTROL.
• Remove the battery cover by
pressing firmly on the arrow
and sliding the cover off.
• Install two 1.5V AAA batteries.
• Slide the dip switch in the
battery compartment to the “1”
setting.
• Turn the electrical power to
the fan off then back on at the
breaker box or the wall switch.
• Press and release the “Learn”
button located in the remote’s
battery compartment within
30 seconds of turning the
electrical power to the fan on.
• If pairing is successful, the
fan’s light kit will flash, the
blades will begin to spin and
the fan and light kit will turn
off within 30 seconds.
1
Operating the remote
control
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device
could void the user’s authority to operate the equipment.
FCC ID: KUJCE10723
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Press and release the
button to turn the light on or off.
Press - to decrease the desired light level.
Press + to increase the desired light level.
1
Downloading the BOND HOME App
• Using your smart device, navigate to the application store (Apple App Store
or Google Play). Download the free BOND Home app and create an account.
2
Connecting to the BOND
Receiver
• Ensure the fan and receiver are receiving power from the house supply by
using the remote control to turn the fan and light on and off.
• Open the BOND Home app on your smart device and follow the instructions
included in the app to add your fan.
Questions, problems, missing parts? Before returning to the store, call
Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m.,
EST Saturday
1-800-330-3267
We appreciate the trust and confidence you have placed in us through the
purchase of this remote control. We strive to continually create quality
products designed to enhance your home.
Thank you!
Item #311264804
Model #99434
- Press and release the button to turn the fan on or off.
- Low speed.
- Medium-low speed.
- Medium-high speed.
- High speed.
- Timer
- While the fan is on press button once - turns on a 1 hour run timer.
- While the fan is on press button twice - turns on a 3 hour run timer.
- While the fan is on press button three times - turns on a 6 hour run timer.
- While the fan is on press button four times - cancel the delay feature.
- Light ON/OFF
CAUTION:
To reduce the risk of fire
or injury, do not use this product
in conjunction with any variable
(rheostat) wall control.
NOTE:
The battery will weaken
with age and should be replaced
before leaking takes place as
this will damage the hand unit.
Dispose of the used battery
properly, keep the battery out of
the reach of children.
WARNING:
To avoid possible
electrical shock, turn the
electricity off at the main fuse box
before wiring. If you feel you do
not have enough electrical wiring
experience, contact a licensed
electrician.
NOTE:
Confirm that your
smart device (phone/tablet) is
connected to your WiFi network
before proceeding.
3
Installing the receiver
WARNING:
To reduce the
risk of fire or electric shock,
remember to disconnect power.
The electrical wiring must meet
all local and national electrical
code requirements. The
electrical source and fan must
be 110/120 volt, 60Hz. Do not
use this product in conjunction
with any variable wall control.
Incorrect wire connection can
damage this receiver.
CAUTION:
If fan or house wires
are a different color, have this
unit installed by a licensed
electrician.
CAUTION:
Do not install in a
damp location or immerse in
water (for indoor use only). Do
not pull on or cut leads shorter.
Do not drop or bump the unit.
Installation (continued)
NOTE:
You must set ceiling fan
to high speed and light kit (if
any) to the on position using
the pull chains (if applicable)
before operating remote
control.
NOTE:
For better performance
with the WIFI system, the WIFI
antenna must be mounted to
the ceiling outside of the fan’s
ceiling canopy.
• Position the house supply wires
(AAA) to one side of the slide-on
mounting bracket; position the
fan wires (BBB) to the opposite
side.
• Insert the narrow end of the
receiver (as shown, flat side
towards the ceiling) into the
slide-on mounting bracket
until it rests on top of the ball/
downrod assembly. The canopy
comes up to cover the receiver
and bracket.
2
Installing the rubber
isolated
pads
• Loosen the two screws
provided with the outlet box;
insert two rubber isolated
pads (F) between the mounting
bracket and the outlet box;
firmly tightened the two
screws.
Installation (continued)
4
Wiring the receiver to the household
wiring
IMPORTANT:
Use the wire
connecting nuts (AA) supplied
with your fan. Secure the
connectors with electrical
tape and ensure there are no
loose strands or connections.
WARNING:
Each wire nut
supplied with this fan is
designed to accept up to
one 12-gauge house wire
and two wires from the
fan. If you have larger than
12-gauge house wiring or
more than one house wire
to connect to the fan wiring,
consult an electrician for the
proper size wire nuts to use.
• Spread the wires apart so that
the green and white wires are on
one side of the outlet box and the
black wire is on the other side.
• Connect the green fan wires to
the household ground wire (this
may be a green or bare wire)
using a wire connecting nut (AA).
• Connect the receiver black (or
red) wire to the household black
(hot) wire using a wire connecting
nut (AA).
• Connect the receiver white
wire to the household white
wire (neutral) wire using a wire
connecting nut (AA).
• Secure each wire connecting nut
using electrical tape.
WARNING:
To avoid possible
electrical shock, turn the
electricity off at the main
fuse box before wiring. If you
feel you do not have enough
electrical wiring knowledge
or experience, contact a
licensed electrician.
Wiring the fan to the receiver
• Connect the fan motor white wire
to the receiver white wire using a
wire connecting nut (AA).
• Connect the fan motor black wire
to the receiver black wire using a
wire connecting nut (AA).
• Connect the fan motor blue wire to
the receiver blue wire using a wire
connecting nut (AA).
• Secure each wire connecting nut
using electrical tape.
• Turn the wire connecting nut (AA)
upward and push the wiring into
the outlet box (MM).
5
IMPORTANT:
Use the wire
connecting nuts (AA) supplied
with your fan. Secure the
connectors with electrical
tape and ensure there are no
loose strands or connections.
1H 3H 6H
Operating Your Remote Control
Mounting the transmitter to the wall
6
• Mount the wall bracket (G) to the
wall by using the two mounting
screws (E). Ensure arrow on wall
bracket (G) is pointing upwards.
Wire
cutter
Electrical tape
Phillips
screwdriver
- Fan Speed
Press fan speed button to cycle through the fan’s four speeds. LED’s on the
fan speed button will illuminate to the corresponding speed.
2. The power supply to the remote
control receiver should be
connected through a mains
switch, i.e. existing wall switch.
3. Disconnect from power supply
at breaker box or wall switch
before working on remote control
receiver or ceiling fan.
4. Install receiver into the mounting
bracket/ canopy of the fan to
ensure proper protection.
5. This unit is to be used for the
control of ceiling fan and in a
AC110/120V 60Hz power supply
only.
6. Do not install in damp locations
or immerse in water. (For indoor
use only.)
7. Do not pull on or cut leads shorter.
8. Do not drop or bump the unit.
9. Do not mix old and new batteries.
10. Do not mix alkaline, standard
(carbon-zinc), or rechargeable (ni-
cad, ni-mh, etc.) batteries.
D
C
F
E
A
B
G
1H 3H 6H
F
Outlet box
Mounting
Bracket
AAA
BBB
VIEW AFTER
INSTALLATION
WIFI antenna mount
outside of the canopy
WIFI
antenna
Receiver
antenna
WIFI
antenna
Receiver antenna
(Leave connected
and do not cut)
Black
(or Red)
Black
Green
(or Bare)
Green
Outlet Box
in the ceiling
(MM)
Antenna
White
B
AA (x3)
Installation (continued)
B
Blue
Antenna
Black White
Green
AA (x3)
Outlet Box
in the ceiling
(MM)
E
B
G
1H 3H
6H
1H
3H
6H