Instruction Sheet
Please retain these instructions for future reference.
Adjustable Toilet Surround Rail
Item Description
This sturdy toilet surround rail is both height and width
adjustable making it suitable for a variety of situations.
Available in either steel or aluminium, it has padded handgrips
for additional comfort and support. Supplied flat packed,
it is easy to assemble without the need for tools.
Intended Uses
To compensate for a disability by helping support the user
while standing up and sitting down.
Instructions for Installation and Use
1.
Lay one of the side frames
(A)
on the floor and position
one of the cross bars
(B)
in the extended rod.
2.
Align the hole on the cross bar with the hole on
the extended rod and insert the pin clip.
3.
Repeat step 1 and 2 with the second cross bar.
4.
Lay the second frame on the floor and put the first
frame assembly onto it. Line up the cross bars with the
extending rods and insert the pin clips. Turn the frame so the
feet are up and secure the cross bars.
Adjusting the height
5.
With the frame lying on one side, press in the brass
studs and slide the leg sleeves
(C)
to the desired height.
Ensure that all of the legs are adjusted to the same height
and the brass studs are securing in the required holes.
Using the floor-fixing feet
After the correct height and width has been determined for the
safe use of the user, the toilet surround rail can be attached
permanently to the floor. Once the frame has been attached
to the floor it can no longer be adjusted in height or width.
Attachment of the frame to the floor should be done by a
qualified tradesman.
Remove the leg sleeves with the rubber ferrules
(C)
and attach
the floor-fixing feet
(D)
in their place.
With the frame properly positioned, mark the position of
the holes in the feet onto the floor. Remove the frame and
check the area to be sure the floor is sound and there are
no obstacles (such as plumbing and wiring). Drill holes and
use suitable fasteners to screw down the feet.
Care and Cleaning
The surround rails can be cleaned with mild detergent
and water. Must be dried after cleaning and before use.
Cautions
• Before use, ensure that all the legs are at the same height
before putting weight on the frame
• Ensure that the top rail cross tube is below the top of the
toilet seat
• The surround rails are designed to take a maximum user
weight of 190kg/ 420lbs/ 30stone
New Code
Old Code
09 107 9987
AA2202
Steel Version
09 107 9995
AA2203
Aluminium Version
09 108 0001
AA2204
Steel Floor Fixing Feet
09 108 0019
AA2205
Aluminium Floor Fixing Feet
New Code
09 117 2378
Bariatric Steel Toilet Surround Rail
09 117 2386
Bariatric Aluminium Toilet Surround Rail
Maximum
user weight
190
kg
30
st
A
B
C
D
www.performancehealth.fr
