WARNING: Putting oil anywhere but the oil tray will damage the air purifier.
QUICK-START GUIDE
READ AND SAVE THESE INSTRUCTIONS
Before turning the unit on:
• Take the air purifier out of the box and remove the clear
protective plastic bag.
• Place the air purifier on a firm, level surface.
• Plug the power cord into a household electrical outlet.
HOW TO USE
1. Press the power button to
turn the air purifier on/off.
2. Press the fan button to
select desired fan speed.
5. Press the nightlight button to
cycle through the nightlight
and display light options.
ADDING ESSENTIAL OILS
ARE ESSENTIAL OILS SAFE TO USE AROUND PETS?
We should always exercise caution when using essential oils around our pets. Keep all essential oil and aromatherapy products (like diffusers) out of reach of pets. Keep open bottles away from pets to avoid
internal consumption. We do not recommend the topical use of essential oils on pets, as they have a strong sense of smell and cannot get rid of the oil if they don’t like it or it is disturbing them. When
diffusing essential oils around pets, always diffuse in a well-ventilated area and leave an option for them to remove themselves from the space, such as leaving a door open. Every animal is different, so
carefully observe how each animal responds when introducing an essential oil for the first time. If irritation occurs, discontinue the use of the essential oil. We recommend seeking medical attention if
ingestion of essential oil occurs.
Refer to the instruction book for filter replacement, UV-C light replacement, cleaning, and maintenance.
1. The oil tray is located on the
side of the air purifier above
the nightlight ring.
QS-APT20
Made in China
6. Press the timer button until the
desired timer setting is lit on
the display. The air purifier will
run continuously when the
timer is off.
5. Place the oil tray back in its
compartment and push to
close. The scent will start
automatically when the air
purifier is turned on.
4. Add 5–7 drops of essential oil
to the pad. You may use more
or less depending on personal
preference.
WARNING: Only
place essential oil on the
pad and NOT directly into
the tray.
2. Push to open and remove
the tray.
3. Place 1 aroma pad (3 included)
into the oil tray.
3. Press the UV-C button to turn
the UV-C light on/off.
4. Press the ionizer button to
turn the ionizer on/off.
OIL TRAY
CONTROL PANEL
POWER
BUTTON
IONIZER
BUTTON
NIGHTLIGHT
BUTTON
UV-C
BUTTON
REPLACE
FILTER LIGHT
FAN SPEED
BUTTON
TIMER
BUTTON
