1. Overview:
These switching power supplies/distribution units convert 120VAC input into 12VDC at 5.5 amps or 11
amps of continuous supply current. Built in distribution boards allow for power delivery across multiple
outputs while offering electronically fused protection on each circuit. These general-purpose power
supplies have a wide range of applications for access control, security and CCTV systems that require
additional power. For convenient installation, they come completely assembled with a compact steel
enclosure, power cord and all connecting hardware.
2. Features:
●
Designed for quick installation.
●
Individually protected, electronically fused outputs.
•
Built in battery backup/charger on selected models(see below)
●
Short circuit isolation technology for uninterrupted operation.
•
Class 2, Power limited outputs.
●
Removable output terminal blocks for quick installation
●
Diagnostic LEDs for quick troubleshooting.
•
Automatic switch over to stand-by battery.
●
AC line cord included.
3. Specifications:
•
•
CE/LVD EN60950-1
•
CE/EMC:EN55022,EN55024
•
FCC PART 15, ICES 003-2012
●
Maximum temperature range:-20° C to 40° C; (For indoor use only.)
●
Relative humidity: 20%
～
90%
•
85% of Efficiency with full load.
•
Maximum ripple 150mVp-p, Maximum noise 200mVp-p
•
Built-in charger (on select power supplies) for sealed lead acid battery.
•
Individual outputs current limited at 2.5 Amps per circuit.
•
Maximum battery charge 500mA (Subtract from total output).
•
Red LED’s indicate DC power presence on each circuit.
Products
Power output
Number of
outputs
Battery
Charger
Enclosure dimensions
HP1205UL-4
12VDC@5.5 Amps
4
No
9.25”. x 8.25” in. x 3.5”
(23.3 cm x 21 cm x 9 cm)
HP1205UL-8
12VDC@5.5 Amps
8
Yes
9.25”. x 8.25” in. x 3.5”
(23.3 cm x 21 cm x 9 cm)
HP1210UL-8
12VDC@11 Amps
8
Yes
17”L x 13.5”W x 4.75”H
(43.2 cm x 34.3cm x 12.06 cm)
HP1210UL-16
12VDC@11 Amps
16
Yes
17”L x 13.5”W x 4.75”H
(43.2 cm x 34.3cm x 12.06 cm)
Note:
When using the battery charger(s) on applicable power supplies for backup /charging, 500mA
needs to be subtracted from the total output power listed above in table for each battery charger.
●
HP1205UL-4,
●
HP1205UL-8,
●
HP12010UL-8,
●
HP1210UL-16
Power Supplies/Distribution Units
PN 0618131: A 07/18/13
Product Installation Document
Honeywell
12 Clintonville Road
Northford, CT 06472-1610
http://www.honeywellpower.com
UL/CUL listed to UL-60950 Information Technology Equipment.
