INSTALLATION INSTRUCTIONS
69-1589
® U.S. Registered Trademark
Copyright © 2002 Honeywell • All Rights Reserved
UC100C Ultraviolet
Air Treatment System
Replacement Lamp
APPLICATION
The UC100C Ultraviolet Air Treatment System Replacement
Lamp is for use with the UV100C Ultraviolet Air Treatment
System.
INSTALLATION
When Installing this Product…
1.
Read these instructions carefully. Failure to follow them
could damage the product or cause a hazardous condi-
tion.
2.
Check the rating given in the instructions and on the
product to make sure the product is suitable for your
application.
3.
Removal and replacement of the ultraviolet lamps can
easily be done by the owner following these instruc-
tions. The owner can also call an experienced service
technician.
4.
After installation is complete, check out product opera-
tion as provided in these instructions.
CAUTION
Personal Injury Hazard.
Power supply can cause electrical shock.
Disconnect power supply before replacing ultraviolet
lamp(s).
Do not open lamp knob; there are no user-serviceable
components inside.
WARNING
UV Light Hazard.
Harmful to bare skin and eyes.
Can cause temporary or permanent loss of vision.
Never look at the lamps while illuminated.
Only view illumination by way of the light indicator
located on the lamp knob.
To prevent exposure to ultraviolet light, disconnect
power to the ultraviolet air treatment system before
servicing any part of the heating/air conditioning
system.
CAUTION
UV Lamp Burn Hazard.
Harmful to bare skin.
Can cause severe burns.
Disconnect power and wait 15 minutes before
removing the ultraviolet lamp(s).
CAUTION
Breakable Glass Hazard.
Can cause personal injury.
Be careful when inserting lamp(s) into lamp base.
Wear protective gloves when handling lamp(s).
