background image

1 

HC-31-220 is for 220 –240V. 

Do not use by any other voltages.

 

 

Identification of parts

 

 

Specifications

 

Power Switch

 

Power Plug 

Steady-state current

 

Power consumption

Frequency

 

Weight

 

Dimensions

 

Rating

 

Max. magnetic flux density

50 Hz

 

12 W (at steady state)

 

230 Vac

 

220 Vac

 

68mT

(

680Gs)

 

0.45 A

 

0.43 A

 

74mT

(

740Gs)

 

880 g

 

34(W)X59(H)X216(D) mm

 

240 Vac

 

76mT

(

760Gs)

 

0.41 A

 

DEMAGNETIZER

 

Thank you for purchasing the HOZAN HC-31-220 DEMAGNETIZER. With proper care and 
handling,

 

this fine instrument will provide years of trouble-free operation. Please read this 

entire instruction manual carefully before attempting to place this instrument in service. 
Please keep this instruction manual available for reference.

 

HC-31-220

 

INSTRUCTION MANUAL

 

 

Summary of Contents for НС-31-220

Page 1: ... 220 Vac 68mT 680Gs 0 45 A 0 43 A 74mT 740Gs 880 g 34 W X59 H X216 D mm 240 Vac 76mT 760Gs 0 41 A DEMAGNETIZER Thank you for purchasing the HOZAN HC 31 220 DEMAGNETIZER With proper care and handling this fine instrument will provide years of trouble free operation Please read this entire instruction manual carefully before attempting to place this instrument in service Please keep this instruction...

Page 2: ...g field Do not point at a person If the operator is using a pacemaker for his her heart this could cause a disorder to the pacemaker When a disorder is felt immediately stop using this demagnetizer and consult a doctor Warning 1 If feel that this device has excessive heat use again after cool the heat enough Using without doing any care could cause dropping of magnetism 2 Be sure to plug off when ...

Page 3: ... from magnetism Measurement apparatus Gauss meter GM 4000 manufactured by Electromagnetic Industries Co Ltd Sensor probe T22078 manufactured by Electromagnetic Industries Co Ltd Distance and magnetic flux density thermal controller The following data shows the relationships between distance and magnetic flux density This has an automatic thermal controller which limits the power and magnetism will...

Page 4: ...TV tube 19 05 If your PC monitor is by aperture mask system after finishing this procedure sometimes verti cal lines appear on the screen by distortion on aperture musk itself receiving repercussion of the demagnetizer but this is not malfunction In case of this softly hit the side of the monitor set to recover Caution Bring the tip of the HC 31 close to the magnetized object While pushing the pow...

Reviews: