background image

EL-MF877-00                                                                                                Page  1 
Template Revision B  

                 

 

 

 

 

  

PSG instructions for this template are available at 

EL-MF877-01

  

 

Product End-of-Life Disassembly Instructions

 

Product Category: Personal Computers

 

Marketing Name / Model 
[List multiple models if applicable.] 

Compaq 303B PC  
           
           
            
           

Purpose: 

The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions 

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU 

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 

1.0

 

Items Requiring Selective Treatment

 

1.1 Items listed below are classified as requiring selective treatment. 

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as 

applicable. 

Item Description 

Notes 

Quantity 
of items 
included 
in product

 

Printed Circuit Boards (PCB) or Printed Circuit 

Assemblies (PCA) 

With a surface greater than 10 sq cm 

(Mainboard and power supply board) 

Batteries 

All types including standard alkaline and lithium coin 

or button style batteries   Located on the mainboard 

Mercury-containing components 

For example, mercury in lamps, display backlights, 

scanner lamps, switches, batteries             

Liquid Crystal Displays (LCD) with a surface greater 

than 100 sq cm 

Includes background illuminated displays with gas 

discharge lamps             

Cathode Ray Tubes (CRT) 

            

Capacitors / condensers (Containing PCB/PCT) 

            

Electrolytic Capacitors / Condensers measuring 

greater than 2.5 cm in diameter or height 

 located on power supply 

up to 8 

External electrical cables and cords 

            

Gas Discharge Lamps 

            

Plastics containing Brominated Flame Retardants 

weighing > 25 grams (not including PCBs or PCAs 

already listed as a separate item above) 

 system and power supply fan 

Components and parts containing toner and ink, 

including liquids, semi-liquids (gel/paste) and toner 

Include the cartridges, print heads, tubes, vent 

chambers, and service stations.             

Components and waste containing asbestos 

            

Components, parts and materials containing 

refractory ceramic fibers 

            

Summary of Contents for Compaq 303B








Reviews: