background image

 

Product End-of-Life Disassembly Instructions

 

Product Category: Monitors and Displays

 

Marketing Name / Model 
[List multiple models if applicable.] 

HP EliteDisplay E243d 23.8-in Monitor 

           

           

            

           

Purpose: 

The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions 

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU 
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 

1.0

 

Items Requiring Selective Treatment

 

1.1 Items listed below are classified as requiring selective treatment. 
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as 
applicable. 

Item Description 

Notes 

Quantity 
of items 
included 
in product

 

Printed Circuit Boards (PCB) or Printed Circuit 
Assemblies (PCA) 

With a surface greater than 10 sq cm 
Main Board & USB Board & Chock  Board 

Batteries 

All types including standard alkaline and lithium coin 
or button style batteries              

Mercury-containing components 

For example, mercury in lamps, display backlights, 
scanner lamps, switches, batteries             

Liquid Crystal Displays (LCD) with a surface greater 
than 100 sq cm 

Includes background illuminated displays with gas 
discharge lamps  Panel 

Cathode Ray Tubes (CRT) 

            

Capacitors / condensers (Containing PCB/PCT) 

 C809/C1166/C1157/C4101/C7086/C7081/C4163/ 
C1017/C1039/C1031/C7821/C7808 

12 

Electrolytic Capacitors / Condensers measuring 
greater than 2.5 cm in diameter or height 

 C905 

External electrical cables and cords 

 Power /USB 3.0/USB Type-C/DC-DC cable/DC 
Jack dongle 

Gas Discharge Lamps 

            

Plastics containing Brominated Flame Retardants 
weighing > 25 grams (not including PCBs or PCAs 
already listed as a separate item above) 

            

Components and parts containing toner and ink, 
including liquids, semi-liquids (gel/paste) and toner 

Include the cartridges, print heads, tubes, vent 
chambers, and service stations.             

Components and waste containing asbestos 

            

Components, parts and materials containing 
refractory ceramic fibers 

            

Components, parts and materials containing 
radioactive substances 

            

Summary of Contents for EliteDisplay E243d








Reviews: