In
The M210 AP is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/g and 802.11n
product. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
M210 Access Point Quickstart
This Quickstart shows you how to get started using the M210 Access Point (US J9467A, WW J9468A).
After reading this Quickstart, you can visit www.hp.com/go/procurve/manuals and download the
M210 Access Point Management and Configuration Guide
and other documentation.
Hardware overview
Package contents
M210, documentation, three antennas, and power supply.
Ethernet port
The M210 is equipped with an auto-sensing 10/100/1000 BaseT Ethernet port with RJ-45
connector. The port supports Power over Ethernet (PoE) 802.3af.
Radio and antennas
The M210 contains an 802.11a/b/g/n-compliant radio with three external dual-band antennas
(MIMO).
Reset button
Press and quickly release the button to reset the M210. To reset the M210 to factory defaults,
press the button until the status lights blink three times, then release.
Three antennas (MIMO)
Status lights (left to
right): Power, LAN,
WLAN 2.4 GHz,
WLAN 5 GHz
Reset button
Ethernet port
Antenna connector
Power connector
