background image

HPE Apollo a6000 Chassis 

Quick Setup Instructions 

   

 
 

 

 

Site requirements 

Select an installation site that meets the detailed installation site 

requirements described in the setup and installation guide on the 

Hewlett Packard Enterprise website 

(

http://www.hpe.com/info/Apollo_6000/docs

). 

 

Verifying the pallet contents for 

the chassis 

 

 

Item 

Description 

HPE Apollo a6000 Chassis 

Server tray blank* 

Server tray* 

Fan assembly (5) 

I/O module 

Power cage (right) 

Management module 

Power cage (left) 

Power management cable** 

10 

HPE Apollo a6000 Chassis Rail kit** 

11 

Service tray* ** 

 

* The quantity depends on the configuration ordered. 

** Not shown 

 

 

© Copyright 2014, 2016 Hewlett Packard Enterprise Development LP 
The information contained herein is subject to change without notice. The 

only warranties for Hewlett Packard Enterprise products and services are set 

forth in the express warranty statements accompanying such products and 

services. Nothing herein should be construed as constituting an additional 

warranty. Hewlett Packard Enterprise shall not be liable for technical or 

editorial errors or omissions contained herein. 

Part Number: 755708-003 

October 2016 

Edition: 4 

 

Summary of Contents for Apollo a6000










Reviews: