Span Access
Platform
Easy to assemble, easy to carry 1.9m
access platform that can span over
obstacles up to 1.5m high.
Operating & Safety Guide 438
ALWAYS brake ALL wheel castors before climbing
onto the platform.
ONLY enter and exit the platform by climbing on
at either end.
NEVER climb onto the unit without having the
clearance brace and clearance brace diagonals
fitted.
NEVER move the unit with people on the platform.
USE on firm, flat level surfaces only.
DO NOT exceed the safe working load – 225kg.
Never push the equipment beyond its design
limits.
If it will not do what you want with reasonable
ease and speed, assume you have the wrong tool for the
job. Contact your local HSS Hire Shop for advice.
EQUIPMENT CARE
Keep the equipment clean
– you will find this less of a
chore if you clean it regularly, rather than wait until the
end of the hire period.
Immediately wash off any spills of paint,
or other
fluids that could mark or stain the equipment.
When not in use,
store the equipment somewhere
clean, dry and safe
from thieves.
Disassemble the Platform by reversing the instructions in
GETTING STARTED, collect all the components together
and
give the unit a final clean up ready for return,
to your local HSS Hire Shop.
FINISHING OFF
Code 80880
©HSS Hire Service Group Plc 2002 No. 438/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.com
Contact your local
0845 728 2828
…any comments?
If you have any suggestions to enable us to improve
the information within this guide please fax your
comments or write to the Product Manager at the
address below
Fax: 020 8687 5001
438/01
Brake
OFF
ON
Platform
Support
Tube
Pin
Rung
Platform
Fixing
Middle Guard Rail
Brace Hook
Lift
Toeboard
Middle
Guard
Rail
Swing
Braces
Span Access Platform
Table of Components
Component
Quantity
End Frame (1.8m)
2
Platform (2.5m)
1
Toeboard set (2.5m)
1
Guard rail frame (1.0m)
2
Guard Rail Brace (2.2m)
4
