POE100
User’s Manual
Gigabit PoE Extender
1-port PD + 1-port PSE
FCC Warning
This device has been tested and found to comply
with limits for a Class A digital device and
pursuant to Part 15 of FCC Rules. These limits
are designed to provide a reasonable protection
against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates and
radiates radio frequency energy. If equipment is
not installed and used in accordance with the
user manual, it may cause interference in which
case, users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
POE100 extender allows extending the distance
between PoE devices by 100M per extender and
cascading for a longer distance.
POE100 extender provides one (1)
10/100/1000M Powered Device (PD) input port
and one (1) 10/100M Power Sourcing Equipment
(PSE) output port with 48V, in compliance with
IEEE 802.3af standard. The distance between
PoE devices can be extended with the help of
POE100 via Cat5/5e/6 cable without any special
equipment.
The POE100 extender can be connected to and
receive power from other PSE/PoE devices
through PD input port via Cat5/5e/6 cable.
Connection between Powered Devices can be
extended by 100M by connection them to the
PSE/PoE output port via Cat5/5e/6 cable.
POE100 is designed for easy installation and
high performance: ideal for the environment
where the network traffic and the number of
users are continuously increasing.
Package Contents
Prior to installation, verify that your POE100
package contains the following items:
•
One 2-port PoE Extender
•
One User’s Manual
Note: If any of these items are found missing or
damaged, please contact your local supplier for
a replacement.
Key Features
•
2-port PoE Extender:
1-port 10/100/1000M PD (Data+Power In)
1-port 10/100/1000M PSE (Data+Power Out)
•
Compliant with IEEE 802.3af Power over
Ethernet
•
Extends the range of PoE by an additional 100
meters
•
Palm size with metal chassis
•
Auto-detect full/half-duplex modes for any port
•
Dedicated full-duplex 2000Mbps bandwidth
•
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
•
Non-blocking & Non-head-of-line blocking full
wire speed forwarding
•
Auto-MDI/MDI-X function for any port
•
Smart plug & play
Front Panel (LEDs)
LED Indicator of POE100:
2-port PoE Extender
LED Status
Description
PoE Out
ON (Green)
Power OUT
PoE In
ON (Yellow)
Power IN
ON
Port is connected
OFF No
connection
LINK/ACT
Blinking
Transmitting/
Receiving Data
Rear Panel (Connections)
PSE/PD to 2-port PoE Extender
POE100 PoE extender provides automatic
crossover detection functionality. This device
can be connected to other PSE/PD via straight
through twisted pair cable (Cat5/5e/6).
.
i3-TRNG-POE100-QuickGuide.doc
Rev. 120509
