to the headset for monitoring, and a headset
adapter is required.
• SETTING THE SIDE TONE LEVEL
Push
[PTT]
to turn the transmit mode “ON”.
During transmit, push
[
Y
]
or
[
Z
]
to adjust
the level.
– “ST-0” is OFF / “ST-10” is the maximum level.
HEADSET CONNECTION
• Connect headset through
the optional OPC-2401
headset adapter.
• TURNING ON BLUETOOTH
®
Push , then hold down
[ENT
SET
]
for 1
second to enter Set mode.
If not displayed, push
[MR
MW
]
until
“BT SET” appears.
Select “BT SET”, then push
[ENT
SET
]
.
Select “ON”, then push
[ENT
SET
]
.
• PAIRING TO A BLUETOOTH
®
DEVICE–A16B
Push
, hold down
[ENT
SET
]
for 1 second
to enter Set mode.
Push
[MR
MW
]
and scroll to “PAIRING”, then
push
[ENT
SET
]
.
QUICK
OPERATION GUIDE
A16
GENERAL
If the button marking on the keypad is in white,
push to activate. For secondary functions push
, then the desired
orange
-marked key.
KNOB
(1)
Rotate to turn the radio power on or
off and to adjust the audio level.
SIDE KEYS
(2 & 3)
(2) PTT SWITCH
(3) SET SQUELCH
Push
[
SQL
Z
]
or
[
SQL
Z
]
(3)
to
the point where noise is just
muted. Push
[CLR]
to return to
frequency mode.
©2023 Icom America Inc. The Icom logo is a registered trademark of Icom Inc. 43373
Select “BT SET” and then “Pairing”.
The radio searches for a headset.
Push
[CLR]
to cancel searching.
“SUCCESS” and “ ” is displayed if the
headset or device is correctly connected.
Push
[CLR
HOME
]
twice to exit the Set mode.
EMERGENCY
Push found at the bottom right of the
keypad), then
[
0
121.5
]
(found next to the
key). Use the PTT to call on the emergency
frequency.
1
2
3
.
OPC-2401
Headset
(User supplied)
FREQUENCIES / CHANNELS NOTES
