–
4
–
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
Thank you for choosing this Icom product.
READ ALL INSTRUCTIONS
carefully and completely
before using this product.
INSTRUCTIONS
VHF P25 TRANSCEIVER
Iç-F7520
UHF P25 TRANSCEIVER
Iç-F7510
SUPPLIED ACCESSORIES
This instruction sheet includes some functions that are
usable only when they are preset by your dealer. The
transceiver may have other functions and operations that
are not described in this instruction sheet. Ask your dealer
for preset function details.
IMPORTANT
NOTE:
Some accessories may not be supplied, or the
shape may be different, depending on the transceiver
version.
A key element in the performance of any communication
systems is the antenna. Contact your dealer for information
regarding antennas and how to install them.
ANTENNA
Fuses are installed in the supplied DC power cable. If a fuse
blows, track down the source of the problem, repair it, and
then replace the damaged fuse with a new rated one.
Fuse rating: 20A
USE
only 20 A fuses
FUSE REPLACEMENT
If the transceiver becomes dusty or dirty, wipe it clean with a
soft, dry cloth.
DO NOT
use harsh solvents such as Benzine or
alcohol, as they may damage the transceiver's
surfaces.
CLEANING
DC power cable
Sponges*
2
Mounting bracket
Flat washers
Spring washers
Bracket bolts
Mounting screws
(M5×12)
Self-tapping screws
(M5×16)
Nuts
*
2
Used for labelling the pro-
grammable function keys
according to their assinged
functions.
Used for the optional unit
installation.
Ask your dealer for details.
*
1
Function name
stickers*
1
Microphone
(Self-grounding type)
Microphone hanger
and screw set
A-7383D-1EX-1 Printed in Japan
© 2017
–
2018 Icom Inc.
–
1
–
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United States, the United Kingdom,
Germany, France, Spain, Russia, Australia, New Zealand, and/or other
countries.
The Bluetooth word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Icom inc. is under license.
All other products or brands are registered trademarks or trademarks of their
respective holders.
FUNCTION DISPLAY
Icon Area
Text Area
Key Display Area
q
w
NOTE:
The screen capture
is an example. The
displayed position of each
icon may differ, depending
on the function being used.
D
Icon Area
Indicators
q
SIGNAL STRENGTH INDICATOR
Displays the relative received signal strength.
w
CLOCK
Displays the current time.
“AM” or “PM” is displayed beside the time display when the 12
hour display format is selected.
“--:--” is displayed instead of the current time when the internal
clock is not set.
Icons
POWER ICON
•“L1” is displayed when the output power is set to low.
•“L2” is displayed when the output power is set to mid.
•“H” is displayed when the output power is set to high.
AUDIBLE ICON
Displayed when the channel is in the ‘audible’ (unmute) mode.
MESSAGE ICON
• Blinks after messages (Message or Status Message) have been
received.
• Stops blinking when the screen is changed, or any key is pushed,
but is displayed if unread messages are still in the Message memory.
• Disappears when all messages in the Message memory have
been read.
BELL ICON
Displayed when a matching signal is received, depending
on the presetting.
SCAN ICON
• Displayed when a scan is paused.
•Blinks while a scanning.
SCAN TARGET CHANNEL ICON
•
Displayed when the channel is selected as a scan target channel.
SCRAMBLER/ENCRYPTION ICON
In the Analog mode:
Displayed when the Voice Scrambler function is ON.
In the Digital mode:
•
Displayed when the Voice Encryption function is ON.
•Blinks when decoding an encrypted signal.
GPS ICON
•Displayed when valid position data is received.
•Blinks when searching for satellites or calculating position data.
RECORD ICON
•Displayed when the Record function is ON.
•Blinks while recording audio.
“
R
” is displayed when there is no microSD card free space and
you cannot record audio.
TALK AROUND ICON
Displayed when the Talk Around function is ON.
PHONE ICON
•
Displayed when the transceiver is connected to a telephone
network on the selected channel.
•Blinks while receiving a phone call.
SITE LOCK ICON
Displayed when the Site Lock function is ON.
LONE WORKER ICON
Displayed when the Lone Worker function is ON.
NOISE CANCEL ICON
Displayed when the Noise Cancel function is ON.
SURVEILLANCE ICON
Displayed when the Surveillance function is ON.
VOX ICON
Displayed when the VOX function is ON.
Bluetooth
®
ICON
•Displayed when Bluetooth
®
is activated.
•Lights Blue when a Bluetooth
®
device is connected.
• Does not light when no Bluetooth
®
device is connected.
microSD ICON
Displayed when a microSD card is inserted.
“
R
” is displayed when the microSD card has not been formatted.
USB ICON
Displayed when a USB device is connected.
D
Text Area
Displays the selected Zone number, Channel number, and
Channel name, if set.
D
Key Display Area
Displays the assigned function of [P1] and [P2].
Ask your dealer about the assigned Software key function.
