background image

 

 
 
S

UPPORT

 

Models supported include 

PDS-700 Series: 

PDS(M)-720(D), PDS(M)-721(D), PDS(M)-734(D), 
PDS(M)-742(D), PDS(M)-743(D), PDS(M)-752(D), 
PDS(M)-755(D), PDS(M)-762(D), PDS(M)-782(D), 
PDS-782(D)-25. 

PPDS-700-MTCP Series: 

PPDS-720(D)-MTCP, PPDS(M)-721(D)-MTCP, 
PPDS(M)-732(D)-MTCP, PPDS(M)-734(D)-MTCP, 
PPDS(M)-742(D)-MTCP, PPDS(M)-743(D)-MTCP, 
PPDS(M)-752(D)-MTCP, PPDS(M)-755(D)-MTCP, 
PPDS(M)-762(D)-MTCP, PPDS(M)-782(D)-MTCP 

 
W

ARRANTY

 

All  products  manufactured  by  ICP  DAS  are  warranted  against 
defective  materials  for  a  period  of  one  year  from  the  date  of 
delivery to the original purchaser. 

 

W

ARNING

 

ICP DAS assumes no liability for damages consequent to the use 
of this product. ICP DAS reserves the right to change this manual 
at  any  time  without  notice.  The  information  furnished  by  ICP 
DAS  is  believed  to  be  accurate  and  reliable.  However,  no 
responsibility  is  assumed  by  ICP  DAS  for  its  use,  nor  for  any 
infringements of patents or other rights of third parties resulting 
from its 

use. 

 

C

OPYRIGHT

 

Copyright ©  2018 by ICP DAS. All rights are reserved. 

 

T

RADEMARKS

 

Names  are  used  for  identification  purposes  only  and  may  be 
registered trademarks of their respective companies. 

 

C

ONTACT 

U

S

 

If you have any questions, please feel free to contact us. We will 
respond within 2 working days. 

Email: 

service@icpdas.com ; service.icpdas@gmail.com

   

 

 

 

 

 

 

 

 

 

 

 

Version: 1.1/ Updated: Aug. 2018

 

 

PDS-700 Series 

Firmware Update via 7188XW.exe 

ICP DAS CO., LTD. 

Website: http://www.icpdas.com 

Ch. 2. Firmware Update Procedure 

Ch. 3. Additional Information 

Ch. 1. Setting up the PDS-700 

Summary of Contents for PDS-700 Series










Reviews: