7/18/2014
Specialized Business Solutions
Page 1
Installation of the IDTech Sign&Pay PIN Pad with Signature Capture
Hardware:
IDTech Sign&Pay PIN Pad with Signature Capture device
Model:
Model #IDFA-3153-IM Rev A (live testing done 03/15/13).
Keystroke Software:
Keystroke POS - v7.15 Build 20 or later (03/12/13).
KeyPay Software:
v6.30.65 or later (03/05/13).
Connection to the Computer – USB:HID Setup
-
With Keystroke POS closed, plug the device into an available USB port
-
Allow Windows to update drivers (automatic)
Setup the PIN Pad hardware in Keystroke POS (USB:HID)
-
In Configuration Manager, under Hardware - PIN Pad
-
Under PIN Pad Type, select IDTech Sign&Pay USB:HID
-
Under Port, Keystroke will automatically identify the port (i.e. USB:HID=2765-8976)
-
Select OK to Save
-
You can test the device by clicking on the Test PIN Pad option
Setup the Signature Capture hardware in Keystroke POS
-
In Configuration Manager, under Hardware - Signature Capture
-
Under Sig Cap Type, select IDTech Sign&Pay USB:HID
-
Under Port, Keystroke will automatically identify the port (i.e. USB:HID=2765-8976)
-
Select Ok to Save.
-
You can test the device by clicking on the Test Device
Setup an Authorization Method for Credit Card payments that use the mag-stripe reader
-
In Configuration Manager, under Tables - Authorization Methods
-
Select the KPCREDIT Method and verify the Type is set to Credit Card
-
Leave the 4 top fields and Settings ID blank
-
Usually turn on Verify Address, Verify Zip, CVV2, and Manually Entered Only
-
Ok Amount is not used so leave this blank
-
Capture Signature should be checked (for Credit Cards)
-
Skip Approved Message is optional. All Declines will always be displayed
-
Under Card Reader, select PIN Pad-Card Swipe Only (Credit Cards)
Setup an Authorization Method for payments that use the PIN Pad & Mag-Stripe reader
-
In Configuration Manager, under Tables - Authorization Methods
-
Select KPDebit, KPEBT, or KPFood auth method and verify Type is set correctly
-
Leave the 4 top fields and Settings ID blank
-
Ok Amount is not used so leave this blank
-
Capture Signature should be OFF (for Debit Cards as it is not required)
-
Skip Approved Message is optional. All Declines will always be displayed
-
Under Card Reader, select PIN Pad-DUKPT Encryption (Debit/ATM Cards)
Setup each Payment Type to use the corresponding authorization method
-
In Configuration Manager, under Tables - Sales Payment Types
-
Turn ON Start in Reference Field (if OFF, it will always prompt for manual entry)
-
Turn ON Parse Reference
-
Under the Auth Method Button, select the authorization method previously setup
Use (KPCREDIT for Credit Cards, KPDEBIT for ATM/Debit, or KPEBT for EBT Cash Benefits).
