RACK-220G QIG
IEI Technology Corp. Page 1
RACK-220G
2U Rackmount Chassis
Version: 1.0
Quick Installation Guide
ABOUT THE RACK-220G
The 2U, metal RACK-220G AT/ATX compatible rackmount industrial
chassis is designed to operate reliably in industrial environments
where it will be exposed to dust, wide temperature variations, and
shocks and vibrations, among other things.
SPECIFICATONS
Form Factor:
Standard 2U, 19” wide
SBC Form Factor:
Full-size, slot CPU cards
Construction:
Metal
Slots Number:
6-slot
Cooling:
2 x 8cm fans
Drive Bays:
o
1 x 5.25” Front accessible optical drive bay
o
1 x 3.5” Front accessible FDD (floppy disk drive) bay
o
1 x 3.5” Internal HDD (hard disk drive) bay
Dimensions (DxWxH):
o
487.5mm x 431mm x 88mm
Operating Temperature:
0~40°C
Relative Humidity:
5~95%
Vibration:
o
5 to 17Hz, 0.1” double amplitude displacement
o
17 to 640Hz, 1.5G acceleration peak to peak
Shock:
10G acceleration peak to peak
PACKING LIST
When you unpack the chassis, make sure the following items have
been shipped.
1 x Quick Installation Guide
1 x Power cord
2 x Handles and handle plates
1 x Screw set
1 x PCI/ISA shock absorber
2 x Keys
DETAILS OF INCLUDED SCREWS
The attached screw set includes five types of screws. Screws used
for chassis installation are shown below.
1 2 3 4 5
Peripherals/Parts
Screw Label (refer to
the picture above)
5.25” Disk Drives
5
3.5” FDD
5
3.5” HDD
1
2.5” HDD
4
Power Supply Unit
1
Rackmount Bracket
3
3
Backplane
2
Table 1: Screws for Peripheral/Parts
