RACK-220GATX QIG
IEI Technology Corp. Page 1
RACK-220GATX
2U Rackmount Chassis
Version: 1.0
Quick Installation Guide
ABOUT THE RACK-220GATX
The 2U, metal RACK-220GATX rackmount industrial chassis
supports microATX motherboards. The RACK-220GATX is designed
to operate reliably in industrial environments where it will be exposed
to dust, wide temperature variations, and shocks and vibrations,
among other things.
SPECIFICATONS
Form Factor:
Standard 2U, 19” wide
SBC Form Factor:
microATX motherboards
Construction:
Metal
Expansion Slots:
Four
Cooling:
2 x 8cm fans
Drive Bays:
o
1 x 5.25” Front accessible optical drive bay
o
1 x 3.5” Front accessible FDD (floppy disk drive) bay
o
1 x 3.5” Internal HDD (hard disk drive) bay
Dimensions (DxWxH):
o
487.5mm x 431.0mm x 88.0mm
Operating Temperature:
0°C ~50°C
Relative Humidity:
10%~95%
Vibration:
o
5Hz ~ 17Hz, 0.1” double amplitude displacement
o
17Hz ~ 640Hz, 1.5G acceleration peak to peak
Shock:
10G acceleration peak to peak
Weight (Net/Gross):
8.2kg/12.4kg
PACKING LIST
When unpacking the chassis, make sure the following items have
been shipped.
1 x Quick Installation Guide
1 x Power cord
2 x Handles
1 x Screw set
DETAILS OF INCLUDED SCREWS
The attached screw set includes five types of screws. Screws used
for chassis installation are shown below.
1 2 3 4 5
Peripherals/Parts
Screw Label (refer to
the picture above)
5.25” Disk Drives
5
3.5” FDD
5
3.5” HDD
1
2.5” HDD
4
Power Supply Unit
1
Rackmount Bracket
3
Table 1: Screws for Peripheral/Parts
