HOW TO CONFIGURE YOUR IFIT MODULE
Follow the steps below to configure your iFit Module.
IMPORTANT: To complete the configuration process, you will
need to know your network SSID (network name), network
encryption type, and network password.
1. Plug the included USB cable into the port on your iFit Module.
Plug the other end of the USB cable into a USB port on your
computer.
2. Turn on your computer, launch your Web browser, and go to
www.iFit.com/install.
3. Follow the instructions on your computer screen. When you
complete the process, the words, “Device has been successfully
configured” will be displayed on your computer screen.
4. Unplug the USB cable from your computer and from your iFit
Module.
5. Unplug the power cord of your fitness equipment. Insert the iFit
Module into the iFit port on the console of your fitness equipment.
Note: If you have questions after following these instructions, go to
support.iFit.com for assistance. To use the iFit Module, see your fit-
ness equipment user’s manual or go to support.iFit.com.
1
iFit Module
USB Cable
5
iFit
Module
Congratulations for selecting the revolutionary iFit
®
Module. Your
iFit Module will help you to create and manage a personal fitness
program designed to make your fitness goals a reality. With the iFit
Module, you can wirelessly download customized workouts, track
your workout results, get support, and even share your achievements
on popular social networking sites. These are just some of the fea-
tures available with your iFit Module.
User’s Manual
Model No. EXIF09.0
QUESTIONS?
If you have questions after following the instructions in this manual,
PLEASE DO NOT CONTACT THE STORE. Please visit our
Customer Care website at support.iFit.com; call Customer Care
toll-free at 1-866-608-1798, Mon.–Fri. 6 a.m.–6 p.m. MT,
Sat. 8 a.m.–12 p.m. MT (closed on holidays); or send e-mail to
service@iconfitness.com.
OPERATING REQUIREMENTS
To con
fi
gure and use your iFit Module, you will need the following:
• A PC or Macintosh computer with a USB port
• A wireless 802.11b/g/n router with SSID broadcast enabled (hidden
networks are not supported)
• An Internet connection (a broadband connection is recommended;
performance depends on connection speed)
• An iFit.com membership
Note: The iFit Module supports unsecured and secured (WEP, WPA,
and WPA2) encryption.
