iHome iB72 User Manual Download

Page: 1 / 8

1
2
3
4
5
6

– Button (Volume Down and Skip Back)
Multi-Function Control Button (MFB)
+ Button (Volume Up and Skip Forward)
LED Indicator (Power On, Pairing, Charging Indication)
Micro USB Charging Port (Under Water-Resistant Cover)
Microphone

BT specification

BT profiles supported

BT IC

Frequency Range

Rechargeable Battery

Operating distance

Impedance (speaker)

Speaker dimension

Working electric current

Working Voltage

Talk time

Music time

Standby time

Charging time

Function

Turn Ear Buds 'On'

Enter the Pairing Mode

Pairing

Play / Pause

Skip to next track
Skip to beginning of current track
Skip to beginning of previous track
Increase volume
Decrease volume
Answer an incoming phone call

Decline an incoming phone call
End a call
Transfer a call between the

phone and the ear buds
Last number redial

Answer second call/Call waiting

Turn Ear Buds Off

iB72 Stereo ear buds

with control dongle

USB Charging Cable

x 1

Silicon Ear Cushions

x 2

SIZE

x 2

SIZE

x 2

SIZE

What’s Included

Lower battery

Charging

Bluetooth connected

Bluetooth not connected

Bluetooth pairing

Red LED light is blinking
Red LED is lit when charging / Blue LED is lit when fully charged
Blue LED is blinking slowly
Blue LED is blinking quickly
Blue & Red LED light is blinking at the same time alternately

LED light indicator

Action Required

When ear buds are 'Off press and hold the MFB for 2 seconds until you hear the

3 ascending beep tones. The LED indicator flashes blue.
When ear buds are 'Off' press and hold the MFB for 4 seconds until you see the

LED indicator alternately flashing red and blue.
Make sure your Bluetooth device is 'On' and in the Pairing Mode. When

iHome iB72 appears on your devices menu, select it to complete pairing.
Short press the MFB to start playback. Short press to pause playback.

Short press to resume playback.
Short press the "+" button during playback
Short press the " - " button during playback
Short press the " - " button twice during playback
Press and hold the "+" button during playback
Press and hold the " - " button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will

automatically pause when you are answering a call and resume when you end the call.
Press and hold the MFB for 1 - 2 seconds to decline the incoming call.
Short press the MFB to end the call and 'hang up'.
While the call is in progress press and hold the MFB for 2 seconds

(transfers call from ear buds to phone or the reverse)
When phone is paired with ear buds but no call is in progress double press the

MFB to redial the last number

While a call is in progress, double press the MFB to put the call on hold

and answer a second caller. Double press MFB again to switch between calls.

Short press the MFB to end current call and return to remaining call.
Press and hold the MFB for 2 seconds until you hear the three descending beep

tones. The LED indicator turns red and then shuts off.

Stabilizer Fins

x 1

set

SIZE

x 1

set

SIZE

x 1

set

SIZE

V4.1
A2DP, AVRCP, GAVDP, GAP, HSP
CSR8645
20Hz - 20kHz
45mAh Li-Polymer x 2
10 Meter without any obstacle
16ohm

6mm

15mA
3~4.2V
5 hours (with fully charged battery)
5 hours (with fully charged battery)
48 hours (under paired)
about 2 hours

Model: iB72

IB English/French (Front)

Color: 1 C + 1C - Black text on white paper

Size: 360 W x 270 H (mm)
Date: May 11, 2015

Limited One-Year Warranty Information

iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants
this product to be free from defects in workmanship and materials, under normal use and
conditions, for a period of one (1) year from the date of original purchase.

Should this product fail to function in a satisfactory manner, it is best to first return it to the
store where it was originally purchased. Should this fail to resolve the matter and service
still be required by reason of any defect or malfunction during the warranty period, SDI will
repair or, at its discretion, replace this product without charge. This decision is subject to
verification of the defect or malfunction upon delivery of this product to the Factory Service
Center authorized by Customer Service.

If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return
Authorization Number and shipping instructions.

Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was
designed. It does not cover (i) products which have been damaged by negligence or willful
actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage
to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this
product to the Factory Service Center and its return to the owner.

This warranty is valid only in the United States of America and does not extend to owners
of the product other than to the original purchaser. In no event will SDI or any of its affiliates,
contractors, resellers, their officers, directors, shareholders, members or agents be liable
to you or any third party for any consequential or incidental damages, any lost profits, actual,
exemplary or punitive damages. (Some states do not allow limitations on implied warranties
or exclusion of consequential damages, so these restrictions may not apply to you.) This
warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.

Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money
order, cashier's check, or credit card) for purchase of your SDI product.

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

iB72-051115-C (EN)

Printed in China

Introduction

Your new iHome Bluetooth stereo ear buds are designed to link with your Bluetooth
enabled smartphone or music player to allow you to wirelessly listen to music and answer
phone calls within the normal 10 meter (33 feet) Bluetooth operating range.

Your ear buds are supplied with 3 sizes of ear cushions and 3 sets of ‘fin’ type stabilizers,
to allow you to customize your ear buds for maximum wearing comfort and stability
during all kinds of exercise and physical activities.

Please review this manual carefully to make sure you are getting the maximum benefit
from all of the features of your new ear buds, and keep this manual for future reference.

wireless earbuds with mic + remote

User Manual

PREPARATION FOR USE

1. Controls and Indicators

OPERATING INSTRUCTIONS

1. Switching Your Ear Buds On and Off

2. Power On / Auto-Linking Mode

PRESS and HOLD the Multi-Function Button (MFB) on the control dongle for

approximately 2 seconds until you hear the three ascending beep tones that indicate

the power is ‘On’. The blue LED begins flashing two times per second indicating that

your ear buds are in the Auto-Linking Mode and trying to re-link to a previously paired

device as long as that device is within the normal pairing range of approximately

33-feet. If your ear buds do not find a previously paired device that is in range and

turned ‘on’ within 3 minutes they will switch from the Auto-Linking mode to the

Power ‘Off’ mode to extend the battery life.

3. Power Off

To shut the power ‘Off’ at any time PRESS and HOLD the Multi-Function Button

(MFB) on the control dongle for approximately 2 seconds. You will hear three

descending beep tones, the red LED flashes once and then the power shuts off.

5. Using Your iHome Bluetooth Ear Buds

The chart on Page 4 explains the basic functions and operations of your Bluetooth

ear buds.

4. Manually Pairing Your iHome Ear Buds With Your Bluetooth Device

NOTE: Your ear buds must be ‘Off’’ to begin the manual pairing process.
With the ear buds in the ‘Off’ mode, PRESS and HOLD the Multi-Function Button

(MFB) on the control dongle for approximately 4 seconds until you see the LED

indicator alternately flashing blue and red. Release the Multi-Function Button (MFB).

Make sure that your Bluetooth device is turned ‘On’ and in the Pairing mode. Refer

to the instructions supplied with your device if necessary. When your device “finds”

the iB72 ear buds, you will see “iHome iB72” appear on your devices Bluetooth

menu screen together with the words “Not Paired”, “Not Connected” or similar.

Touch “iHome iB72” to complete the pairing process. You will hear a single beep,

and you will see “iHome iB72 Connected” on your devices Bluetooth menu. NOTE:

If your Bluetooth device asks for a Password or a PIN to complete the pairing

process, enter “0000” on the keypad of your device.

You are now ready to begin streaming music wirelessly from your Bluetooth device

to your iHome iB72 Bluetooth ear buds.

NOTE: The first time you perform this operation you might find it convenient to place

only the left ear bud in your left ear. This will allow you to hold the control dongle in

your right hand so that you can see the control buttons and the LED indicator and still

hear the confirmation tones in your left ear. Once the ear buds have turned on and

paired with your Bluetooth device you can then place the right ear bud in your right ear.

Specifications

2. Charging Your Ear Buds

IMPORTANT:

Your iHome ear buds operate on a built-in rechargeable lithium-ion

battery. Although the battery was fully charged when it left our factory, like all batteries

it can experience some power drain during periods of non-use. For best results we

recommend that you charge the battery for approximately 3 hours before using your

ear buds for the first time.
1. Lift up the water resistant cover to expose the micro USB

charging port.

2. Connect the micro USB plug on the charging cable to the

micro USB port on the headphone. NOTE: The micro

USB plug can only be inserted into the micro USB

charging port one way. To avoid damaging the

connection make sure the plug is properly aligned with

the charging port.

3. Connect the standard USB plug on the charging cable to any standard USB power

port such as found on a notebook computer, or the charging adapter for an iPod,

iPhone, etc.

4. The Power/Charging/Pairing indicator will glow RED while the ear buds are

charging. The indicator will turn BLUE when the battery is fully charged, indicating

that your ear buds are ready for use.

3. Wearing Your Ear Buds

Your iHome ear buds are supplied with 3 sizes of ear

cushions and 3 sizes of flexible stabilizer ‘fins’. The

ear buds are clearly marked with ‘L’ and ‘R’

indications. Place the ‘L’ ear bud in your left ear and

the ‘R’ ear buds in your right ear as shown in the

illustration.

When worn properly the control dongle will be on

your right side. Some users prefer to wear the ear

buds with the cable behind their neck. Others may

prefer to have the cable in front of their neck. Either

wearing style is acceptable.

These earbuds come preinstalled with the medium

size cushions. If you find that the medium size

cushions are either too large or too small for your

ears you can easily replace them with the small or

large cushions. Additionally, if you would like to wear

these earbuds during active use, you may want to

select a comfortable size of in-ear ‘fins’ for added

stability. To change to a different size cushions or

fins, first simply pull the cushion off the tube, then

position the desired size of fin on the ear bud

housing as shown, and then replace the desired size cushion Be sure to match the

‘L' and ‘R' fins with the corresponding earbuds, the ‘fins’ should hook into the front

part of your ear as shown in the illustration.

IMPORTANT: Make sure that the cushion is firmly seated on the tube so that the

cushion does not remain in your ear canal when you remove the ear buds.

It is not necessary to use the same size cushions and fins. You may find for example

that using the ‘M’ size cushions with the ‘S’ size fins is most comfortable for you. That

is a matter of personal choice.

1
2

iB72

: BTH042

• Warning: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102

and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF

exposure and compliance.

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

FCC ID: RMZ-BTH04

IC: 986B-IB72

Declaration ID: D024204

FCC Information

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to

the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause

undesired operation of the device.