iBT820 - Instruction Sheet - English
Color: Black text on white paper (1C + 1C)
Size: 102 W x 150 H mm
Material: 85gsm wood free paper
Nov 8, 2021
CHARGING THE SPEAKER
CONTROLS OVERVIEW
iBT820_IS_211108-A
Printed in China
© 2022 SDI Technologies, Inc.
All rights reserved
Model: iBT820
For product support, please scan the QR code or visit:
www.ihome.com/help/ibt820
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ISED Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et
la conformité.
Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité de l'utilisateur à
utiliser l'équipement.
CAN ICES-3 (B) / NMB-3(B)
WARNING/DISPOSAL OF UNIT
Do NOT attempt to change the battery. Doing so will void the warranty and could cause
personal
injury and damage to your device.
To dispose of the unit, follow the instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they
may
contain toxic substances.
• Always dispose of used batteries/electronics in accordance with the prevailing community regulations.
• Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-off location near
you, visit www.call2recycle.com
GENERAL BATTERY PRECAUTIONS
• Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic
substances.
• Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit).
• Never expose a battery to any liquid.
• Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated
vehicle where excessive internal temperatures may be encountered.
• Always keep batteries out of the reach of infants and small children.
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
1 Do not
charge
this product near
a
water
source
, and clean only with dry cloth.
2 Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
3 Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat.
4 Only use attachments/accessories specified by the manufacturer.
5 Unplug this product during lightning storms or when unused for long periods of time.
6 Damage Requiring Service – This product should be serviced by qualified service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally.
7 No naked flame sources, such as lighted candles, should be placed on this product.
8 Attention should be drawn to the environmental aspects of battery disposal.
9 This product is suitable for use in tropical and/or moderate climates.
10 WARNING: To reduce the risk of fire or electric shock, this device should never be left unattended when plugged in and charging.
Recharging the internal battery shall only be conducted by an adult. Always charge the device on a non-flammable surface and
keep away from flammable materials.
11 Do not dispose of batteries in the household trash or fire.
12 If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage.
13 Always use a UL/ETL certified charging adapter (not included), and the supplied USB charging cable.
POWER ON/OFF
-Press and hold to turn speaker ON
USB-C
AC
adaptor
(not included)
USB-C charging
cable (included)
CHARGE UNIT
BEFORE USE
ABOUT
4
HOURS
LED STATUS INDICATORS
charging (slow flash)
fully charged
low battery (fast flash)
RED
OFF
RED
BLUETOOTH PAIRING
USB-C CHARGING PORT
PLAY/PAUSE
BOTTOM OF UNIT
TOP OF UNIT
LED INDICATORS
RESET BUTTON
Use the extended tip of a
paper clip or other thin tool
to push in the reset button
-Press & hold to enter pairing mode
-Select ‘iHome iBT820’ on your device to pair
-To cancel pairing, press Blueooth Button again
COLOR MODES/BATTERY LEVEL
PLAY
GLOW+
Waterproof Portable Speaker
pairing (flashing)
connected to Bluetooth
BLUE
BLUE
BLUETOOTH STATUS
BATTERY STATUS
-Blue LED = Bluetooth Status
-Red LED = Battery Status
-Press repeatedly to cycle through different
color modes, including OFF
-Press and hold to check battery level status
VOLUME
DOWN
VOLUME
UP
USB-C CHARGING
PORT
-Short press to turn speaker OFF
Nov 8, 2021
