MODEL NUMBER:
XRM901-4-0-GB-XX
I
MPRO
X RRM
ImproX (RRM) Registration Remote Reader
INSTALLATION MANUAL
SPECIFICATIONS
Working Environment
.................
The ImproX RRM is designed to work in an
indoor environment similar to IP42. The
ImproX RRM is, therefore, NOT sealed against
water.
Buzzer
Tone .......................................
Four volume, single tone (Software may
support single tone only).
Status Indicators
Status LED .............................
Bi-coloured Red or Green.
INSTALLATION INFORMATION
Accessories
Find the following when unpacking the Remote Reader:
An ImproX (RRM) Registration Remote Reader housed in a Natural, Anodised,
Aluminium extruded Cabinet. The ImproX RRM consists of a Front Cover, a Base
Frame and two Side Plates (the assembly includes 2 m (7 ft) of flat, 4-core Cable).
An extra Serial Number Label.
General
Remember the following when installing the Remote Reader:
Distance between the Registration Interface and the ImproX RRM
The maximum cable distance between the ImproX Registration Interface and the
ImproX RRM, MUST NOT exceed 2 m (7 ft).
Blank Space
