![background image](http://html1.mh-extra.com/html/impro/xtt909-1-0-gb-xx/xtt909-1-0-gb-xx_installation-manual_2049682001.webp)
MODEL NUMBER:
XTT909-1-0-GB-XX
I
MPRO
X CA
ImproX (CA) 125 kHz Conduit Antenna Reader
INSTALLATION MANUAL
SPECIFICATIONS
Working Environment
.................
The IP rating for the ImproX CA is equivalent
to the selected Cabinets rating.
Buzzer
Volume and Tone ...................
Single tone, 4-step adjustable volume.
Status Indicators
Status LED .............................
Bi-coloured Red or Green.
INSTALLATION INFORMATION
Accessories
Find the following when unpacking the Antenna Reader:
10 ImproX CA Antenna Reader printed circuit board assemblies.
An extra Serial Number Label.
General
Remember the following when installing the Antenna Reader:
Maximum Data Communications Distance
The ideal cable distance between the Terminal, Controller or Receiver and its Antenna
Reader ranges between 2 m to 16 m (7 ft to 53 ft). Achieve this by using a good quality
shielded multi-strand 3-pair twisted cable. The cross-sectional area of the cable must
not be less than 0.2 mm
2
(0.0003 in
2
).
Cable Specifications
The cable specifications should be similar to the following:
Conductor Resistance:
< 2 ohms.
Capacitance, Core to Earth:
< 160 pF/m.
Capacitance, Core to Core:
< 100 pF/m.