Operating Instructions - Washer-Dryer Indesit WIDL126
Control Panel
Detergent dispenser: To add detergent and fabric softener
LEDS: To find out which wash cycle phase is under way. If the delay timer function has been set, the time left until
the programme starts will be indicated.
Drying dial: To set the desired drying cycle
Function buttons: To select the functions available. The button corresponding to the function selected will remain
on.
Temperature dial: To set the temperature or the cold wash cycle
Start/Reset button: To start the programmes or cancel any incorrect settings
On-Off/Door Lock LED: To find out whether the washer-dryer is on and if the appliance door can be opened
On/Off button: To turn the washer-dryer on and off.
Programme dial: To select the wash programmes. The dial stays still during the cycle.
Starting a programme
1.
Switch the Washer-dryer on by pressing button
All the LEDS will light up for a few seconds and the On-
Off/Door Lock LED will begin to flash.
2.
Load your laundry into the washing machine and shut the appliance door.
3.
Set the Programme dial to the programme required.
4.
Set the wash temperature
5.
Set the drying cycle if necessary
6.
Add the detergent and any fabric softener
