background image

INGERSOLL RAND COMPANY INC

209 NORTH MAIN STREET – BRYAN, OHIO 43506

 (800) 495-0276 

 FAX (800) 892-6276 

© 2020 

CCN 15227663

arozone.com

OPERATOR’S MANUAL 

PF20X-XXX-XXX-B

INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE

RELEASED: 2-10-05

REVISED: 8-4-20

(REV: L)

2” DIAPHRAGM PUMP

1:1 RATIO FLAP VALVE (METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING, 

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

Figure 1

SERVICE KITS

Refer to Model Description Chart to match the pump materi-

al options.

637310-XX 

for fluid section repair (see page 3).

637374-X 

major air valve assembly (see page 7).

 

NOTE:

 This kit also contains several replacement air motor 

seals.

637421 

for air section repair (see page 6).

PUMP DATA

Models

  . . . . . . . . . . . .see Model Description Chart for “-XXX”

Pump Type

  . . . . . . . .Metallic,  Air  Operated,  Double  Diaphragm,                 

Flap Valve

Material

  . . . . . . . . . . .see Model Description Chart

Weight

  . . .   PF20A-XAX-SXX-B . . . . . . 97.3 lbs (44.2 kgs)

                       PF20A-XCX-SXX-B . . . . . . 166.2 lbs (75.4 kgs)

                       PF20A-ASX-SXX-B . . . . . . 166.0 lbs (75.3 kgs)

                       PF20A-BSX-SXX-B . . . . . . 166.0 lbs (75.3 kgs)

                       PF20A-FSX-SXX-B . . . . . . 177.1 lbs (80.3 kgs)

                                (add 28.9 lbs [13.1 kgs] for stainless steel air motor section)

Maximum Air Inlet Pressure

  . . . . . . . .  120 psig (8.3 bar)

Maximum Material Inlet Pressure.

  . .  10 psig (0.69 bar)

Maximum Outlet Pressure

  . . . . . . . . . .  120 psig (8.3 bar)

Maximum Flow Rate

  . . . . . . . . . . . . . . . . . . . .  

172 gpm (651 lpm)

Displacement / Cycle @ 100 psig

  . . . .  1.4 gal. (5.3 lit.)

Maximum Particle Size

  . . . . . . . . . . . . .  2” dia. (51 mm) 

semi-solids

Maximum Temperature Limits

 (diaphragm / flap / bumper material)

E.P.R. / EPDM . . . . . . . . . . . . . . -60

 to 280

 F (-51

 to 138

 

C)

Hytrel

  . . . . . . . . . . . . . . . . . . . -20

 to 180

 F (-29

 to 82

 C)

Nitrile  . . . . . . . . . . . . . . . . . . . . 10

 to 180

 F (-12

 to 82

 

C)

Polypropylene  . . . . . . . . . . . . 32

 to 175

 F (0

 to 79

 C)

Santoprene

  . . . . . . . . . . . . . -40

 to 225

 F (-40

 to 107

 C)

PTFE. . . . . . . . . . . . . . . . . . . . . . 40

 to 225

 F (4

 to 107

 C)

Viton

   . . . . . . . . . . . . . . . . . . . -40

 to 350

 F (-40

 to 177

 C)

Dimensional Data

  . . . . . . . . . . . . . . . . . . .  see page 8

Mounting Dimension

 .   9-1/16” x 10-1/16” (230 mm x 256 mm)

Noise Level

 @ 70 psig, 60 cpm

  . . . . . .  85.0 dB(A)

 Tested with 67263 muffler assembly installed.

 The pump sound pressure levels published here have been updated to 

an Equivalent Continuous Sound Level (LA

eq

) to meet the intent of ANSI 

S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.

MODEL DESCRIPTION CHART

PF20X - X  X  X - S  X  X - B

Thread

A - NPTF

B - BSP

F - 2” ANSI / DIN Flange

Centre Section Material

A - Aluminum

S - Stainless Steel

Fluid Section Service Kit Selection

EXAMPLE: Model #PF20A-AAP-SAA-B

Fluid Section Service Kit # 637310-AA

PF20X - XXX - X X X - B

 Flap 

Diaphragm

637310 - X X

Fluid Caps and Manifold Material 

A - Aluminum

C - Cast Iron

S - Stainless Steel

Diaphragm Material

A - Santoprene

B - Santoprene

C - Hytrel

G - Nitrile

L - Long Life PTFE

T - PTFE / Santoprene

V - Viton

Seat Material

S  - Stainless Steel

Hardware Material

P - Plated Steel

S - Stainless Steel

Flap Material

A - E.P.R.

G - Nitrile

U - Polyurethane

V - Viton

Summary of Contents for ARO PF20 B Series









Reviews: