GoECO
TM
Power
Door Open
Overheat
Overload
QUICK SETUP GUIDE
NT-PS08MC
10-sheet Micro Cut Shredder
Features
GoECO
TM
Power-Saving Technology (patent-pending) consumes energy
only during actual shredding. This means the shredder will not use power
when it is stand-by.
LED
Setting up the shredder
1
Place the shredder head securely on the rim of the supplied
wastebasket. The shredder has a built-in safety mechanism that requires
the shredder to be correctly placed on the supplied wastebasket.
2
Connect the power cord to a power outlet.
Using the shredder
1
Slide the power button from
OFF
to
AUTO
.
2
Insert paper into the paper slot, or insert one credit card or one disc
(CD/DVD/Blu-ray) into the disc slot.
Caution
: Do not insert more than 10 pages, one credit card, or one disc
at a time. You may damage the shredder.
Power
Lights green when the shredder is in use.
Turns off when the shredder is standy-by (power-saving mode).
Door Open
Lights yellow if the wastebasket is opened or not mounted correctly.
Overheat/Overload Lights red when the shredder is jammed or overheated. The paper inserted
is likely more than recommended or the shredder has been used too long.
Please reduce the number of sheets or stop shredding until light turns off.
