Part No 1055947
1
Quad Cane Camlock Replacement Kit
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
Quad Cane Camlock Replacement Kit
Model Nos. 1055948
NOTE:
Check
ALL
parts
for
shipping
damage.
In
case
of
shipping
damage,
DO
NOT
use.
Contact
Carrier/Dealer
for
further
instructions.
Safety Summary
To
ensure
the
safe
and
proper
installation
of
the
Quad
Cane
Camlock,
these
instructions
Must
be
followed:
WARNING
DO NOT use this equipment without first reading and understanding this instruction
sheet. If you are unable to understand the warnings, cautions and instructions, contact
a healthcare professional, dealer or technical personnel if applicable, before
attempting to install this equipment - otherwise, injury or damage may occur.
Invacare products are specifically designed and manufactured for use in conjunction
with Invacare accessories. Accessories designed by other manufacturers have not
been tested by Invacare and are not recommended for use with Invacare products.
Camlock MUST be properly engaged (locked) during use.
Double-button MUST be fully engaged and protruding through height adjustment
hole on cane handle to ensure a positive lock.
ALWAYS test to see that the cane handle is properly and securely locked in place
before using. This will ensure that camlock is secure.
Quad Canes are designed to provide ambulatory assistance to an individual weigh-
ing up to 250 lbs. (113.6 kg.). The replacement camlock does not in any way change
the weight limitation of your quad cane.
Description of Kit
Assembling the Camlock
NOTE:
For
this
procedure,
refer
to
Detail
“A”
of
FIGURE 1
on
page
2.
1. Soak
camlock
housing
in
warm
water
for
approximately
10
minutes.
NOTE:
Soaking
will
allow
the
housing
to
soften
adequately
to
aid
in
installation.
2. Remove
housing
from
water.
3. Insert
cam
lever
into
camlock
housing,
handle
first,
through
cutout
in
camlock
housing.
4. Rotate
cam
lever
90°
until
the
rear
(round)
portion
of
the
cam
lever
is
positioned
into
the
recess
of
the
cam
housing
with
large
tab
on
rear
of
cam
lever
facing
down.
Assembly, Installation and Operating Instructions
SAVE THESE INSTRUCTIONS
ITEM
DESCRIPTION
QTY
1048085
Cam Lever
1
1048086
Cam Housing
1
