QUICK ADJUST CRUTCH
MULETA DE AJUSTE RAPIDO
BÉQUILLES À RÉGLAGE RAPIDE
* Quick hand
grip adjustment
* Patient height
guide for proper
fitting
* No assembly
required
* Ajuste rápido del
agarrador
* Guía para ajustar
a estatura del
paciene
* No se requiere
ensamble
JUNIOR - MODEL 8120-J
ADULT - MODEL 8120-A
TALL ADULT - MODEL 8120-T
* Réglage rapide de la
poignée
* Guide de grandeur du
patient pour réglage
adéquat
* Aucun assemblage
requis
JOVEN - MODELO 8120-J
ADULTO - MODELO 8120-A
ADULTO ALTO - MODELO 8120-T
JUNIOR - MODÈLE 8120-J
ADULTE - MODÈLE 8120-A
ADULTE - GRAND -MODÈLE 8120-T
NOTE: Check ALL parts of the Crutches for shipping dam-
age before use. In case of shipping damage, DO NOT use.
Contact Carrier/Dealer for further instruction.
SAFETY SUMMARY
The following recommendations are made for the safe opera-
tion and adjustment of the Crutches:
Quick Adjust Crutch
Assembly, Installation and
Operating Instructions
Model Nos. 8120-J, 8120-A, and 8120-T
FIGURE 1 - HEIGHT ADJUSTMENT
GENERAL WARNING
DO NOT use this equipment without first reading and under-
standing these instructions. If you are unable to understand
the Warnings, Cautions, and Instructions, contact your
Invacare dealer or Invacare Customer Services at 1-800-
333-6900 before attempting to use this equipment - other-
wise, injury or damage may occur.
INSTALLATION WARNINGS
Proper height adjustments MUST be made to both the leg
extension and the hand grip. A dealer or therapist should
aid in the proper placement for maximum balance and
support.
Be sure that snap buttons are fully protruding through the
same respective adjustment hole of each leg extension.
This ensures that the adjustable legs are securely locked
into position and an even height adjustment is obtained.
Ensure that the handle lock pins are fully engaged and
secure before use.
Ensure that rubber crutch tips are not ripped, worn or miss-
ing. Replace before using the crutches.
DO NOT use parts, accessories or adapters other than
those authorized by Invacare.
The crutches have a recommended weight limit of 250
lbs./pair.
HEIGHT ADJUSTMENT (FIGURE 1)
NOTE: Refer to the GENERAL WARNINGS and INSTALLATION
WARNINGS in the SAFETY SUMMARY of this instruction sheet.
1.
ADJUSTING HANDLE POSITION (DETAIL A)
- Push both
handle locks IN (direction of arrow stamped on side of handle
lock) and align the handle with the desired adjustment holes.
There will be an audible click when handle locks are fully en-
gaged and secure. Repeat for other crutch.
2.
ADJUST THE LEG EXTENSION (DETAIL B)
- Depress
both snap buttons on the leg extension and allow them to snap
through the desired adjustment holes on the crutch leg frame.
Make sure snap buttons are fully engaged and locked in place
before use. Repeat for other crutch.
Handle Lock
(In LOCKED
Position)
Handle Lock
(In UNLOCKED
Position)
Adjustment Holes (1 of 5)
Crutch Handle
Crutch
DETAIL “A”
Arrow
DETAIL “B”
Leg Extension
Snap Button
Crutch Leg Frame
Adjustment Hole (1 of 9)
