INSTRUCTIONS FOR MEASURE-TAKING AND INSTALLATION
Instruction validity: as of 1 August 2013
SELF-SUPPORTING BLIND, UPROLLING OUTSIDE THE CHANNEL
1. MEASURE-TAKING
Measure-taking applies to width (W) and height (H) of the opening.
The blind width should be measured in three points
– atop, in the middle and at the bottom.
For manufacture and order, the lowest dimension measured is indicated.
(1) - electrical cable
2. INDIVIDUAL PARTS
(2) - self-supporting box
(3) - guide bars
(4) - slat packet
H
H
W
W
