background image

How to connect my Jabra PRO 92x with Alcatel IP Touch 4028,

4038, 4068

Jabra Alcatel MSH Adapter for Go/Pro

Prerequisite

:

Jabra PRO 92x + Jabra 14201-36 cable

In combination with one of the following phones:

IP Touch 4028

IP Touch 4038

IP Touch 4068

 

Connection

:

2-sided end: 

Insert the RJ45 plug (red band) into the red socket marked with "AUX" and

the RJ10 plug (blue band) into the blue base socket of the Jabra PRO 92x

marked with a “phone” symbol. 

2-fold Y-coupling end:

Insert the 3.5 mm audio jack into the headset interface and the RJ12 plug

into the bell socket of the phone. The extra connector socket on the Y-

coupling remains free for connection to an IP phone!

Now you can setup the headset for your phone with the automatic or

manual configuration.

07/04/2021 01:15

https://www.jabra.com/supportpages/jabra-link-14201-36/14201-36/faq/c030b786-24aa-
4d6f-90ab-fddf39d431fb

Page 1 of 4

Summary of Contents for 14201-36

Page 1: ...d the RJ10 plug blue band into the blue base socket of the Jabra PRO 92x marked with a phone symbol 2 fold Y coupling end Insert the 3 5 mm audio jack into the headset interface and the RJ12 plug into the bell socket of the phone The extra connector socket on the Y coupling remains free for connection to an IP phone Now you can setup the headset for your phone with the automatic or manual configur...

Page 2: ...phone Now the appropriate EHS mode should be set up If the automatic configuration did not work please select the MSH mode manually See manual Base setup Set the phone setup switch to position A Microphone volume setting 07 04 2021 01 15 https www jabra com supportpages jabra link 14201 36 14201 36 faq c030b786 24aa 4d6f 90ab fddf39d431fb Page 2 of 4 ...

Page 3: ...elect Phone setup with system software version below version 9 xx Important The Force Headset function must not be activated on the phone as otherwise it will not be possible to accept external calls Menu Settings Phone Audio Jack Force headset OFF Menu Settings Phone Socket Activate headset Dial tone signal transfer phone setup Important The dial tone signal in the headset is only transmitted if ...

Page 4: ...t be set to OFF Calls being made via the headset can be connected forwarded as follows Dial the phone number Forward will now appear in the phone display now press on to the appropriate function key next to the phone display thereafter you must end the call with the button marked Handset 07 04 2021 01 15 https www jabra com supportpages jabra link 14201 36 14201 36 faq c030b786 24aa 4d6f 90ab fddf...

Reviews: