Jabra Link 14201-10 How Do Download

Page: 1 / 4

How do I connect my Jabra Pro 9400 / Go 6400 with Aastra

6753i, 6755i, 6757i?

Jabra Link 14201-10

Requirements:

Jabra Link 14201-10

DHSG connection cable from Aastra

Aastra 53i / 55i / 57i / 57iCT / 6753i / 6755i / 6757i / 6757iCT phone with

firmware 2.5.1.2000 or later

To connect your headset to your phone follow these steps:

1. Plug the RJ10 connector (green) from the split end of the Aastra DHSG

cord into the headset socket.

2. Plug the RJ45 connector (yellow) from the split end of the Aastra DHSG

cord into the socket for the expansion module.

3. Plug the single end of the Aastra DHSG cord (blue) in the RJ45 adapter.

4. Plug the single end of the Jabra Link 14201-10 cable (blue) into the free

07/04/2021 01:15

https://www.jabra.com/supportpages/jabra-link-14201-10/14201-10/faq/4b3cba38-ca36-
4410-8a36-3e1fbff5b658

Page 1 of 4

Summary of Contents for Link 14201-10

Page 1: ...the RJ10 connector green from the split end of the Aastra DHSG cord into the headset socket 2 Plug the RJ45 connector yellow from the split end of the Aastra DHSG cord into the socket for the expansi...

Page 2: ...the complete phone symbol b Plug the RJ45 connector into the socket marked AUX 6 Follow the instructions on the Jabra device touchscreen a Select Phone settings b Select Connect to a desk phone 07 04...

Page 3: ...HSG 7 Set the phone setup switch to position A 8 We recommend setting the microphone volume to 7 out of 13 07 04 2021 01 15 https www jabra com supportpages jabra link 14201 10 14201 10 faq 4b3cba38 c...

Page 4: ...s In version 2 5 1 2000 the DHSG mode is deactivated by default You need to activate it using Aastra cfg or mac cfg using the command dhsg 1 Set the Audio mode to Headset Speaker Options Default setti...