1
1
Designer styleD Marine
toilet
FeatUres
• Very quiet flush cycle - like a household toilet
• Single button flush actuator- with dual function water
level control switch
• Supplied with Par-Max 4 self-priming pump to
provide sea water or lake water to rinse the toilet
bowl
• Vitreous china bowl available in compact 14
"
height
or standard 17
"
height
• Available in White or Bone
• Baked enamel seat & cover
• High capacity waste macerator and bowl discharge
pump
• All toilet plumbing and wiring connections are
internal-out of sight
sPeCiFiCations
Ports:
PAR-MAX Pump and Toilet
Inlet- 3/4
"
Hose Barb
Outlet-1
"
Hose Barb
Motor & switch:
Pump and Toilet Meet U.S.C.G.
Regulation 183.410 and ISO
8846 Marine for Ignition
Protection.
Toilets are marked
andcomply with
EN50081-1 for suppression of
electro-magnetic interference.
normal Water
Consumption:
1-2 Quarts (Litres)/Flush
oPeration
The Designer Styled Toilets with the popular Quiet-
Flush system provide both quiet operation and user
control of water levels in the toilet bowl. A single large
push-button switch provides a simple flush mode by
activating both the rinse water supply and the macerator
discharge pump simultaneously. An additional rocker
switch offers independent control of the rinse water
supply and discharge pump separately so the bowl
water level can be easily raised or lowered by the user.
This provides a method of minimizing water use, when
desired, as well as a means of raising the water level in
the bowl when appropriate for user comfort. It also
allows for complete evacuation of the bowl water while
underway in rough sea conditions.
Model number
Description
37275-0092 Compact White Toilet 14
"
, 12 Volt EMC
37275-0094 Compact White Toilet 14", 24 Volt EMC
37275-1092 Standard White Toilet 17
"
, 12 Volt EMC
37275-3092 Standard Bone Toilet 17
"
, 12 Volt EMC
37275-1094 Standard White Toilet 17
"
, 24 Volt EMC
37275-3094 Standard Bone Toilet 17
"
, 24 Volt EMC
installation
The 37275-Series Designer Styled Toilet includes the
Quiet-Flush Toilet pumping system and is supplied with a
dedicated PAR-MAX 4 pump to provide either sea or lake
water to rinse the toilet bowl when flushing the
toilet. This pump is intended to be located remotely from
the toilet but will function best if the distance from the
toilet is kept to a minimum. Because it is self-priming, it
may be located above the vessel’s waterline. It must be
installed with the Pumpgard strainer (provided with the
toilet) located somewhere in the inlet plumbing to the
pump. The toilet also includes a multi-function flush
control which should be installed in a bulkhead location
that is convenient to the toilet and allows access for
wiring to run from the power source and to both the toilet
discharge pump and PAR-MAX rinse water pump.
Because all plumbing and wiring connections at the
toilet are made internally within the china bowl, all
plumbing and wiring must be completed and extended to
the toilet location prior to final installation of the toilet.
Model 37275-series
