background image

                                                                              

P/N 2411600000 Rev. D 07/2011 

 

Page 1

Jade Range LLC, A Middleby Company 

2650 Orbiter Ave. 
Brea, CA 92821 
Telephone (714) 961-2400 
FAX (714) 961-2550 

MODELS: JGM, JGGM, JGT, JGTS, JGTSD,

JGTSDS, JGGT, JGGTS, JTYG GRIDDLES                 

AND JHP, JHPE HOT PLATES

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS 

NOTE: Instructions must be posted in a prominent location, which will instruct the user in the event that 
he/she detects the odor of gas. This information shall be obtained from your local gas company.  

Adequate clearances must be provided in front, in rear and at sides of appliance for servicing. The appliance 
area must be kept free and clear from combustibles. There must be no material or obstacles obstructing the 
flow of combustion and ventilation air.  

WARNING

Improper installation, adjustment, alteration, service or 
maintenance can cause damage, injury or death. Read the 
installation, operating and maintenance instructions 
thoroughly before installing or servicing this equipment. 

FOR YOUR SAFETY 

Do not store or use gasoline or other 
flammable vapors or liquids in the vicinity 
of this or any other appliances. 

WHAT TO DO IF YOU SMELL GAS 

Open windows 

Do not touch electric switches 

Extinguish open flames 

Immediately call your gas company

Summary of Contents for JGM









Reviews: