60
124
68
HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-P560
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P560)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA:
www.jamaudio.com/customer-support/product-registration
CAN:
canada.jamaudio.com/product-registration
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge
them using your computer or a wall outlet. The Alloy needs about 4 hours for up to 5 hours of party time.
The LED light on your speaker lets
you know what it’s doing.
1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION – IT’S A SETUP
Like any amazing couple, this one starts with a connection — one between
your device and the speaker’s
Bluetooth
. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has
Bluetooth
.
2. Turn on the speaker (press and hold the power button for 3 seconds) and
look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Alloy in your device’s
Bluetooth
list or click YES.
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
The device and
Bluetooth
will find each other every time, as long as the
speaker is set to
Bluetooth
and your device’s
Bluetooth
is, you know, on.
If you’re connecting to a computer, you may have some extra steps on that
end. You’ll have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If
prompted, enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press and
hold the PLAY/PAUSE button for 6 seconds to activate pairing mode.
Note: If you turn on your Alloy but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more,
the Jam Alloy will automatically shut off to preserve battery power.
Thank you for purchasing
the
JAM Alloy
. Check
out the sections below
for all the important
information about your
new speaker.
Pairing Mode
Connected
Charging
Ready to Party
Aux-In Mode
Low Battery
Continued on page 2.
AC adaptor not included.
Back:
Bottom:
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
Bluetooth
®
Devices
JAM Alloy
on
>
3s
or
4h
1. Turn the music down (press and hold for
3 seconds to move to the previous track)
2. Push it to play, push it again to pause
3. Turn the music up (press and hold for 3
seconds to skip to the next track)
4. Shed some light on what your speaker is
doing (see chart to the right for details)
5. Toggle between languages here
6. The power cord goes here
7. Here’s where you hook it up old-school
8. This is the power button
9. Language selector pin
2
1
3
4
5 6 7
8
9
