94
R22
HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-HP150
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Customer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-HP150)
Register your headphones! Information about where
you bought them and how you’re using them is like
gold for the people who make these headphones.
To register, visit:
USA:
www.jamaudio.com/customer-support/product-registration
CAN:
http://canada.jamaudio.com/product-registration
Charging the headphones is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge
them using your computer or a wall outlet. The Transit City needs about 3 hours for up to 12 hours of party time.
The LED light on your headphones lets
you know what they’re doing.
1. The cord that came with the
headphones—the one with the USB on one
end and the Micro USB on the other—will work
with your computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a Micro USB the
next time you’re at the store, or use any USB
AC adapter, including the one for your cell.
CONTROL YOUR DESTINY... OR AT LEAST YOUR HEADPHONES
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION – IT’S A SETUP
1. This is the power button. It also lets you
know what your speaker is up to (see chart
to the right for details)
2. Turn the music up
3. Turn the music down
4. Press it to play, press it again to pause
5. Skip back a track
6. Jam on to the next song
7. Noise cancelling feature
8. Aux-in port to hook it up old school
9. The power cord goes here
Like any amazing couple, this one starts with a connection—one between
your device and the headphones’
Bluetooth
. Here’s how it works:
1. Make sure the smartphone, tablet or computer you’re using with the
headphones has
Bluetooth
.
2. Turn on the headphones (press and hold the power button for 3
seconds) and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
or
3h
4. Look for Jam Transit City Headphone in your device’s
Bluetooth
list or click YES.
5. Now hit PLAY on your headphones and crank it up—or down if
you’re lame.
The device and
Bluetooth
will find each other every time, just as long
as the headphones are set to
Bluetooth
and your device’s
Bluetooth
is, you know—on.
If you’re connecting to a computer, you may have some extra steps
on that end. You’ll have to get that information from the computer
company.
Depending on your device you may be prompted to enter a pairing
code. If prompted, enter “0000” as the code.
To disable pairing of existing device and pair a new device, press
and hold the + and - buttons for 5 seconds to activate pairing mode.
Note: If you turn on your Transit City Headphones but haven’t
started the party yet, they will automatically power off after 2 minutes
of unpaired inactivity.
Note: Once paired, if you pause the party for 15 minutes or more,
your headphones will automatically power off to preserve battery life.
3s
Thank you for purchasing
the
JAM Transit City
.
Check out the sections
below for all the
important information
about your new
headphones.
Pairing Mode
Connected
Powering On
Charging
Ready to Party
Low Battery
Continued on page 2.
AC adaptor not included.
3
5
2
1
4
6
7
8
9
