Features
•
UL217 Listed
•
Sleek design
•
Wall tamper
•
Strong, reliable RF signal
•
Low Battery indication
Key Instructions
1. Read the “INSTALLING YOUR SMOKE ALARM” section
a. Install your Smoke Alarm.
2. Enroll the Smoke Alarm in a panel:
a. Place the JAQX Smart Hub into wireless enrollment mode by pressing the
external red button for 3 seconds until hub beeps.
b. Send an enrollment signal from the sensor by press & holding TEST button
until you hear the sounder beep.
3. Confirm that the sensor has been properly enrolled by checking for new FLOOD zone
on your JAQX App or in your customer portal.T
4. Test the Smoke Alarm is enrolled in a panel:
a. Press & hold TEST button until you hear the sounder beep.
b. Panel will indicate a Smoke Test.
c. Read the “WEEKLY TESTING OF YOUR SMOKE ALARM” section:
5. Test the functionality of the Smoke Alarm.
Operation
Situation
Sounder
LED
Wireless Signal to Panel
Recovery
Actual smoke
RED
(pulsing)
Wireless Smoke Alarm Signal
sent to hub.
Silence an actual alarm with the TEST button. Sensor will return to
alarm if smoke is still present.
Press & hold test
button
Wireless Smoke Test Signal
sent to hub.
Sensor: Restore by releasing the test button
Removing Sensor
from Mount
Tamper/Trouble signal to be
sent to hub.
Restore by remounting.
Low Battery
Chirp
Yellow/Red
(blink)
Maintenance Needed
Temporal 3
(Loud)
Yellow
(Pulsing)
Supervisories Not Sent
Replace Unit
Specifications
Approval:
UL217 Single Station Smoke Alarm & Heat Alarm
Smoke Sensitivity:
1.31
–
2.28 %/ft
Heat Temperature:
135 to 140 F
Smoke Technology:
Photoelectric
aHeat Alarm Point: 135
–
149 F (UL
Alarm Sound:
Temporal Three
Replacement Battery:
Panasonic CR123A
Duracell DL123A
Temperature Range:
32 to 120 F (Long Term)
Humidity:
10
–
85% Relative Humidity
Housing dimensions:
4.7 inch diameter, 2.1 inch high
Frequency:
433.92 MHz
System Compatibility:
RE6100 series panels with capacity of up to 96 zones
User's Manual:
47-0001-08 Rev A
Design & Manufacture:
Resolution Products, Inc.
1402 Heggen Street
Hudson, WI 54016
Smoke Sensor
Temporal 3
(Loud)
Yellow
(Steady)
Temporal 3
(Loud)
Temporal 3
(Loud)
RED
(pulsing)
