Control SB210
Dual 10" Indoor/Outdoor
High Output
Compact Subwoofer
Key Features:
2 x 250 mm (10 in.) Aluminum/
Ceramic Composite Cone Drivers
400 Watts Power Handling
Fully Outdoor Capable Design
SonicGuard™ Overload Protection
13 x M6 Suspension Inserts,
Including Inserts for Optional U-
Bracket
AV Shielded
Compact, Low Profile Design
The Control SB210 provides low fre-
quency reinforcement for a wide vari-
ety of sound system applications. Its
compact size, high output and outdoor
capable design makes it one of the
most versatile subwoofers in the instal-
lation market.
The internal angled baffle allows for
a large port opening and compact front
dimensions without compromising dri-
ver size. The SB210 produces warm,
punchy low-end sound.
The Aluminum/Ceramic Composite
Diaphragm 10" Drivers are rated for
pink noise power handling of 200
Watts each, providing 400 Watts
(1600 Watt peaks) of system power
handling. The dual driver design also
allows for stereo operation of the
enclosure and provides great flexibility
when used with one of the optional
network accessory kits. Choose the
MTC-210-SAT network accessory to
drive a full subwoofer/satellite system
with one amplifier. The network
receives a stereo or mono source, and
sends a high-passed 4-Ohm or 8-Ohm
Satellite output signal for operation
with other Control loudspeakers. The
MTC-210T-SAT network can be used in
same manner when using a 70.7/100-
Volt distributed signal line.
Included with the SB210 are four feet
and four receptacles to allow floor and
shelf mounting as well as reliable stack-
ing of multiple units. The thirteen M6
insert points allow for installation using
forged shoulder eyebolts for suspend-
ing the subwoofer. The Optional U-
Bracket MTC-210UB allows for addi-
tional versatility in mounting.
The High Impact PolyStyrene (HIPS)
cabinet is available in black or white
(SB210-WH) and is paintable. The ther-
moset composite-coated grille stands
up to UV as well as humidity and
direct exposure to water. The grille is
backed with a combination of materials
that, while acoustically transparent, pre-
vent the intrusion of water into the
cabinet even when hit directly, such as
from rain or a sprinkler.
Specifications:
System:
Frequency Range (-10 dB): 42 Hz - 200 Hz
Frequency Response (-3 dB): 48 Hz - 120 Hz
Power Capacity
1
: 800 Watts Continuous Program Power
400 Watts Continuous Pink Noise
Nominal Sensitivity
2
: 95 dB, 1W @ 1m in half-space (2
loading)
97 dB, 1 W @ 1m at three boundary junction (
/2 loading)
Max SPL @ 1m
3
: 122 dB (in half-space)
Nominal Impedance: 8 Ohms
Minimum Impedance: 7 Ohms at 100 Hz
Transducers:
Low Frequency: 2 x 250 mm (10 in.) dia., 50 mm (2 in.) edge wound ribbon
voice coil, Aluminum/Ceramic Composite cone.
Physical:
Enclosure Material: High Impact PolyStyrene (HIPS) w/internal 8 mm
polyurethane co-mold
Grille: Thermoset composite coated steel, multi-layer
Overload Protection: SonicGuard™
Environmental: IEC 529 IP-X5 rating. Exceeds MilSpec 810 for humidity, salt
spray, temperature & UV. Passes Mil-STd-202F for salt spray.
Termination: Screw-down terminal strip, zinc plated copper base, nickel-
plated metal screws/washers. Accepts up to 9mm outside,
4mm inside open lug (#6, #8 or #10 lug), plus bare wire (up
to 12 AWG/2.5mm2).
Colors: Black or white (-WH)
Dimensions (H x W x D): 355 x 590 x 570 mm (14 x 23.3 x 22.5 in.)
Net Weight (ea): 17.1 kg (38 lbs)
Shipping Weight (ea): 19.4 kg (43 lbs)
Included Accessories: 1 pc MTC-PC4 input panel cover, 4 pcs MTC-210FT floor
standing foot, 4 pcs MTC-210RT foot receptacle for stacking.
Optional Accessories: MTC-210UB U-Bracket
MTC-210-SAT stereo/mono high passing network with Satellite
outputs
MTC-210T mono network with transformers for 70.7/100V
distributed line systems. Taps at 250W, 125W, 62W (plus 31W
for 70.7V only).
MTC-210T-SAT stereo/mono high passing network with
Satellite outputs and transformers for 70.7/100-Volt distributed
line systems. Taps at 125W, 62W, 31W (plus 15W for 70.7V
only).
1
Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously.
Continuous program power is defined as 3dB above the Continuous Pink Noise Rating and is a conservative expres-
sion of the system’s ability to handle normal speech and music program material.
2
Half-space, averaged 60 Hz to 80 Hz
3
Calculated from sensitivity and power handling. Power compression is not considered.
JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this rea-
son, any current JBL product may differ in some respect from its published description, but will always equal or exceed
the original design specifications unless otherwise stated.
