Quick Setup Guide
JBL OnBeat
™
RIZe
COnneCtIOnS
1. Plug the JBL OnBeat Rize’s power supply into the DC-In connector on the unit and into
a working AC power outlet. The JBL OnBeat Rize will automatically turn on. The clock
display screen will read “On” for 3 seconds and will then show “--:--”. When you dock
your device the OnBeat Rize’s clock display will synchronize with the device’s clock and
will display the current time.
DC-In
Audio-In
DC In
Aux In
2. If you are going to use your JBL OnBeat Rize with another audio source, plug one
end of a 3.5mm (1/8") stereo cable (not supplied) into the JBL OnBeat Rize’s Audio-In
connector, and plug the other end into the audio source’s audio out or headphone out
connector.
WeLCOme
Thank you for purchasing the JBL OnBeat
™
Rize iPad dock. This quick setup guide will
show you how to connect and set up your
dock. To download the free JBL AmpUp App
please go to the Apple App Store.
NOTE: Alarm functions described below are
available only through the JBL AmpUp app.
