background image

080-1475

1X

1X

1X

Included Items

Your new JBL

®

 SUB150P 300-watt powered subwoofer incorporates 

a 10" (250mm) PolyPlas™ cone transducer and a built-in high-

performance 300-watt (RMS) amplifier that deliver the powerful, 

dynamic and accurate low-frequency performance that makes your 

film soundtracks and music come alive. And with line-level and LFE 

inputs, adjustable crossover and phase controls and automatic turn 

on/off, the SUB150P is also simple to connect and set up.

We’re confident that this JBL subwoofer will provide every note 

of enjoyment that you expect – and that when you think about 

purchasing additional audio equipment for your home, car or office, 

you will once again choose JBL products. 

This quick-start guide contains all the information you need to set 

up, connect and adjust your new subwoofer. For more in-depth 

information, go to our Web site: www.jbl.com.

thank You For choosIng thIs JBl

®

 Product

suB150P

300-Watt, 10" (250mm) Powered Subwoofer

quIck-start guIde

0242CSK - JBL SUB150P OM_v3.indd   1

29/09/10   9:57:48

Summary of Contents for SUB150P

Page 1: ...s and automatic turn on off the SUB150P is also simple to connect and set up We re confident that this JBL subwoofer will provide every note of enjoyment that you expect and that when you think about purchasing additional audio equipment for your home car or office you will once again choose JBL products This quick start guide contains all the information you need to set up connect and adjust your...

Page 2: ... whether the subwoofer is in the On or Standby state When the LED glows green the subwoofer is turned on When the LED glows red the subwoofer is in the Standby mode Line In LFE Input Connectors When you re connecting the subwoofer to the dedicated subwoofer output of a receiver processor that has its own low pass crossover network use the LFE Input connector and set the Input Mode switch in the LF...

Page 3: ...ield very good results while others may have far too much or too little bass at certain frequencies In many rooms placing the subwoofer along the same plane as the left and right speakers 2 can produce the best integration between the sound of the subwoofer and that of the left and right speakers In some rooms the best performance could even result from placing the subwoofer behind the listening p...

Page 4: ...s seems too loud or too quiet you may want to place it in a different location Placing the subwoofer in a corner will tend to increase its bass output while placing it away from any walls or corners will tend to lessen its bass output Subwoofer Adjustments Phase The Phase switch determines whether the subwoofer driver s piston like action moves in and out in phase with the satellite speakers If th...

Reviews: