background image

Model: 

SR-F2W

 

Wireless  Remote  Controller 

English Instruction Manual 

 

 

 

Thanks  for  your  purchase  of  a  JJC  SR-F2W  Wireless  Remote  Controller.  For  the  best 

performance,  please  read  this  instruction  carefully  before  using.  You  must  read  it 

thoroughly and fully understand this manual to avoid improper operation which may result 

in damage to the product. 

 

JJC  SR-F2W  Wireless  Remote  Controller  is  specially  designed  for  Sony  cameras  and 

camcorders.  You  can  use  the  wireless  remote  controller  to  operate  a  camera  or  a 

camcorder that has a Sony Multi Terminal. The wireless remote controller allows you to 

control  the  camera  or  camcorder  from  afar  when  shooting,  so  it  also  prevents  camera 

shaking.  The  working  distance  of  SR-F2W is  up  to  100 meters.  The  unit  includes  three 

parts: transmitter, receiver and a connecting cable. It powers easily. The transmitter and 

receiver  are  respectively  powered  by  two  AAA  batteries.  The  wireless  remote  controller 

has  basic  recording  functions  (power  on  /  off,  video  start  /  stop,  focusing  /  shooting, 

zooming and displaying grid lines). With locking function, JJC SR-F2W is ideal for Bulb 

long exposure and continuous shots. The receiver has a universal 1/4"-20 tripod socket 

on the bottom, so you can even mount it onto a tripod. Moreover, equipped with a 1/4"-20 

tripod socket in the backside, the transmittercan attach to any object with a 1/4"-20 male 

screw. JJC SR-F2W replaces Sony RMT-VP1K and RM-VPR1 Remote Commander. 

Summary of Contents for SR-F2W

















Reviews: