Johnson Controls DVN 5000, Quick Start Up Manual

Step 

1

Step 

2

□

Unpack the equipment.

□

Insert hard drives into drive slots as shown
below.

a

□

Press each drive until it clicks and the handle is 

held behind the release button.

a

□

Connect to VGA monitor.

c

□

Connect mouse and keyboard.

c

□

Connect AC Power.

d

□

Connect to network.

c

□

Connect analog cameras.

c

Step 

3

□

Turn on the main power on the 

back of the DVN.

e

□

Press the power switch on the 

front of the DVN.

e

Main Power Switch

1

2

5

3

4

Please read before installation

2

3

6

4

5

3

MOUSE

□

Check for damage.

□

Mount the DVN in a 19

‐

inch rack, 

if applicable, using the rack shelf 

or an optional sliding rail.

b

x

(back view)

6

PAGE 1

24

‐

10520

‐

14 Rev. A

Important:

For complete installation instructions, 

refer to the 

DVN 5000 Rackmount Series 

Installation Guide

.

0

1

2

3

System

e. See “Switching the Server On and Off” in the

DVN 5000 Rackmount Series Installation Guide
(Part Number 24

‐

10129

‐

4)

.

b. Refer to the 

DVN 5000 Storage, Shipping, and Environmental Guidelines

(Part Number 24

‐

10520

‐

22)

.

c. See “Cable Connections Scheme” in the 

DVN 5000 Rackmount Series

Installation Guide (Part Number 24

‐

10129

‐

4)

.

d. See “Connecting the Power” in the 

DVN 5000 Rackmount Series Installation

Guide (Part Number 24

‐

10129

‐

4)

.

a. See “Inserting the RAID Drives and System Drive in the Drive Bay” in the

DVN 5000 Rackmount Series Installation Guide (Part Number 
24

‐

10129

‐

4)

.